Integra DRX-2.3 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. Receiver
  5. DRX-2.3
  6. Instruction manual

Integra DRX-2.3 Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DRX-2.3
AV Receiver
Instruction Manual
En
Table of contents
Connections
- Connecting Speakers
Playback
Setup
Troubleshooting
Appendix
Supplementary Information
Front Panel≫ Rear Panel≫ Remote≫
≫
≫
≫
≫
≫
≫
≫
≫

Advertisement

Table of Contents
loading

Related Manuals for Integra DRX-2.3

Summary of Contents for Integra DRX-2.3

  • Page 1 ≫ Table of contents ≫ Connections ≫ - Connecting Speakers DRX-2.3 AV Receiver ≫ Playback ≫ Setup ≫ Troubleshooting Instruction Manual ≫ Appendix ≫ Supplementary Information Front Panel≫ Rear Panel≫ Remote≫...

  • Page 2: Table Of Contents

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box Connecting an Audio Component Additional Function (Firmware Update) Connecting an AV Component in a Separate Room (Multi-zone Connection) Update Information of the firmware Connecting a TV (ZONE 2) Operation of added new functions Connecting ZONE B Firmware Update Procedure...
  • Page 3 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio Playing Back FlareConnect Tuning into a Radio Station Playing Back Presetting a Radio Station USB Storage Device Using RDS (Australian and Asian models) Basic Operations Multi-zone Device and Supported Format Playing Back Playing back files on a PC and NAS (Music Server) ZONE B Playback...

  • Page 4: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 3. Audio Adjust 4. Source 5. Listening Mode Preset 6. Hardware 7. Multi Zone 8. Miscellaneous Quick Menu Menu operations Web Setup Menu operations Initial Setup with Auto Start-up Wizard Operations Troubleshooting When the unit is operating erratically Troubleshooting Appendix...

  • Page 5: What's In The Box

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ What’s in the box 1. Main unit (1) 2. Remote controller (RC-973R) (1), Batteries (AAA/R03) (2) 3. Speaker setup microphone (1) • Used during Initial Setup. 4. Indoor FM antenna (1) 5. AM loop antenna (1) 6.

  • Page 6: Additional Function (Firmware Update)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Additional Function (Firmware Update) This unit is equipped with a function to update the firmware via network or USB port when the firmware update is announced after purchase. This enables various functions to be added and operations to be improved. Depending on the manufacturing timing of the product, the firmware may be switched to the updated one.

  • Page 7: Firmware Update Procedure

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Firmware Update Procedure The update may take approx. 20 minutes to complete via network or via USB Update port. Existing settings are guaranteed in either updating method. 1. Press When this unit is connected to the network, notifications of firmware updates may The Setup menu is displayed on the TV screen.

  • Page 8: Main

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Press On/Standby on the main unit to turn the unit into standby mode. The • Turn off control devices (PC etc.) connected to the network. • Stop an Internet radio, USB storage device, or server content being played. process is completed, and your firmware is updated to the latest version.
  • Page 9 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • Do not use on the remote controller. 5. Press The Setup menu is displayed on the TV screen. If an Error Message is Displayed If an error occurs, "- Error!" is displayed on the display of the unit. ("" Setup represents an alphanumeric character.) Refer to the following descriptions and check.

  • Page 10: Part Names

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Part Names Front Panel                   ❏ For details, see ( p11) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 11 Contents Connections Playback Setup ≫ ≫ ≫ ≫ On/Standby button 18. Input selector buttons: Switches the input to be played. 19. AUX Input Video/Audio jacks: Input the video and audio signals from an 2. Hybrid Standby indicator: Lights up when any of the following functions is external player with an analog audio/video cable.

  • Page 12: Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Display 1. Speaker/Channel display: Displays the output channel that corresponds to the FM ST: Receiving FM stereo. selected listening mode. SLEEP: Sleep timer is set. ( p119) p119) 2. Lights in the following conditions. AUTO STBY: Auto Standby is set.

  • Page 13: Rear Panel

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Rear Panel 90° 90° 180° 180° ❏ For details, see ( p14) Front Panel≫ Rear Panel≫ Remote≫...
  • Page 14 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. TUNER AM/FM terminal: Connect the supplied antennas. 3. VIDEO IN jacks: Input AV component video signals with an analog video cable. 4.

  • Page 15: Remote Controller

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Remote Controller On/Standby button  2. Input selector buttons: Switches the input to be played.  3. Play buttons: Used for playback operations for the Music Server ( p59)  or USB device ( p56).

  • Page 16: Connections

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connections Connecting speakers Connecting the TV Connecting Playback Devices Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting ZONE B Connecting Antennas Network Connection Connecting External Control Devices Connecting the Power Cord Front Panel≫...

  • Page 17: Connecting Speakers

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting speakers You can select the layout of speakers to be installed from various patterns when using this unit. Use the following flow chart to select the speaker layout that suits your speakers and usage environment.

  • Page 18: Speaker Installation

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Installation „ 5.1 Channel System This is a basic 5.1 Channel System. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 19 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System This is a 7.1 Channel System that consists of the basic 5.1 Channel System p18) and added surround back speakers. Front speakers output the front stereo sound, and a center speaker outputs the sound of the center of the screen, such as dialogs and vocals.
  • Page 20 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System A 5.1.2 Channel System is a speaker layout consisting of the basic 5.1 Channel System ( p18) and added height speakers. Select the height speakers that suit your speakers and usage environment from the following three types. ❏...
  • Page 21 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Front High Speakers/Rear High Speakers This is a system with the basic 5.1 channel system ( p18) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, Installation Example and added front high speakers or rear high speakers combined.
  • Page 22 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Ceiling Speakers Installation Example This is a system with the basic 5.1 channel system ( p18) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and added top front speakers or top middle speakers or top rear speakers combined. Installing the height speakers will enrich the sound field feeling in the upper space.
  • Page 23 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Dolby Enabled Speakers (Dolby Speakers) This is a system with the basic 5.1 channel system ( p18) consisting of front speakers, a center speaker, surround speakers and a powered subwoofer, and Installation Example added Dolby enabled speakers (front) or Dolby enabled speakers (surround) combined.

  • Page 24: Speaker Connections And "Speaker Setup" Settings

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Connections and "Speaker Setup" Settings Connections „ (Note) Speaker Impedance Connect speakers with an impedance of 4 Ω to 16 Ω. If any of the speakers to be connected has an impedance of 4 Ω or more and less than 6 Ω, set "Speaker Impedance"...
  • Page 25 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Connect the Subwoofer a Subwoofer cable Connect a powered subwoofer with this unit using a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
  • Page 26 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 27 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Zone 2 Bi-Amp Speaker Impedance 6ohms or above...
  • Page 28 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1 Channel System (Bi-Amping the Speakers) "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 5.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 29 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height Speaker Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 30 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 7.1 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 7.1 ch < > Subwoofer Height Speaker Zone Speaker Zone 2 Bi-Amp Speaker Impedance 6ohms or above...
  • Page 31 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Front High Zone Speaker Bi-Amp Speaker Impedance 6ohms or above Select how many speakers you have.
  • Page 32 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 5.1.2 Channel System + ZONE SPEAKER MAIN ROOM "Speaker Setup" settings during „ Initial Setup ( p133) Speaker Setup Speaker Channels 5.1.2 ch < > Subwoofer Height Speaker Front High Zone Speaker Zone 2 Bi-Amp Speaker Impedance...

  • Page 33: Speaker Combinations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker combinations • Up to two powered subwoofers can be connected in either combination. SURROUND ZONE 2 Speaker Channels FRONT CENTER SURROUND HEIGHT Bi-AMP BACK (ZONE SPEAKER) 2.1 ch (*1) (*1) 3.1 ch (*1) (*1) 4.1 ch...

  • Page 34: Connecting The Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the TV Connect this unit between a TV and AV component. Connecting this unit with the TV can output the video and audio signals of the AV component to the TV, or play the audio of the TV on this unit.

  • Page 35: To Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To ARC TV If the TV supports the ARC (Audio Return Channel) function (*), use only the HDMI cable to connect with the TV. Use the ARC-compatible HDMI IN jack of the TV for connection.

  • Page 36: To Non-Arc Tv

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ To Non-ARC TV If the TV does not support the ARC (Audio Return Channel) function (*), connect an HDMI cable and digital optical cable. • If you use a cable set-top box, etc. connected to the input jack of this unit to watch TV (without using a TV’s built-in tuner), connection with a digital optical cable or analog audio cable is not required.

  • Page 37: Connecting Playback Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Playback Devices Connecting an AV Component with HDMI Jack Mounted This is a connection example of an AV component equipped with an HDMI jack. When connecting with an AV component that conforms to the CEC (Consumer Electronics Control) standard, you can use the HDMI CEC function (*) that enables linking with input selectors, etc.

  • Page 38: Connecting An Av Component Without Hdmi Jack Mounted

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component without HDMI Jack Mounted This is a connection example of an AV component unequipped with an HDMI jack. Select cables that match the jacks of the AV component for connection. For example, when video input is connected to the BD/DVD jack, connect the audio input to BD/DVD jack, too.

  • Page 39: Connecting An Audio Component

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an Audio Component This is a connection example of an audio component. Connect a CD player using a analog audio cable. You can also connect a turntable that has an MM-type cartridge to the PHONO jack.

  • Page 40: Connecting An Av Component In A Separate Room (Multi-Zone Connection)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting an AV Component in a Separate Room (Multi-zone Connection) Connecting a TV (ZONE 2) While a disc is played on a Blu-ray Disc player in the main room (where this unit is located), you can play the video and audio of the same Blu-ray Disc player or another AV component on the TV equipped with an HDMI IN jack in a separate room (ZONE 2).

  • Page 41: Connecting Zone B

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting ZONE B Connecting a Pre-main Amplifier (ZONE B) While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier (ZONE B) connected to the ZONE B LINE OUT jack at the same time.

  • Page 42: Connecting Antennas

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting Antennas Connect the antenna to this unit, and set up the antenna at the best position for listening while receiving radio signals. Attach the indoor FM antenna to the wall using push pins or adhesive tape. (North American (Australian and models)

  • Page 43: Network Connection

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Network Connection This unit can be connected to the network using a wired LAN or Wi-Fi (wireless LAN). You can enjoy network functions such as Internet radio by network connection. If connection is made by the wired LAN, connect the router and the ETHERNET jack with the LAN cable as shown in the illustration.

  • Page 44: Connecting External Control Devices

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting External Control Devices IR IN/OUT port When connecting a remote control receiver unit consisting of an IR Receiver, etc. to this unit, operation using the remote controller is possible even if the remote control signal is difficult to reach (due to installation in the cabinet, etc.).

  • Page 45: Trigger Out Jack

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 12V TRIGGER OUT jack When connecting a device equipped with a TRIGGER IN jack such as a BD/DVD player to this unit, the device can be turned on or set to standby by interlocking the operation on this unit.

  • Page 46: Connecting The Power Cord

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting the Power Cord Connect the power cord after all the connections are completed. • This unit includes a removable power cord. Be sure to connect the power cord to the AC INLET of the unit first, and then connect it to the outlet. Always disconnect the outlet side first when disconnecting the power cord.

  • Page 47: Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playback AV Component Playback BLUETOOTH Playback ® Internet Radio Spotify AirPlay ® DTS Play-Fi ® FlareConnect USB Storage Device Playing back files on a PC and NAS (Music Server) Play Queue Amazon Music Connecting your Unit to a Sonos System Listening To the AM/FM Radio Multi-zone...

  • Page 48: Av Component Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ AV Component Playback You can play the audio from AV components, such as Blu-ray disc players through this unit. • When a TV is connected to the HDMI OUT SUB jack, use the HDMI Main/Sub button or "Quick Menu" ( p129) to switch between MAIN and SUB.

  • Page 49: Bluetooth Playback

    If a password is requested, enter "0000". • This unit is displayed as "Integra DRX-2.3 XXXXXX". This display can be changed with the Friendly Name function ( p118) or the Integra Control Pro (can be used with the iOS or Android™).

  • Page 50: Internet Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio By connecting this unit to an Internet-connected network, you can enjoy Internet radio services, such as TuneIn Radio, etc. • To play Internet radio services, the network needs to be connected to the Internet. •...
  • Page 51 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Internet Radio Service Menu You can bookmark specific stations, or delete stations that have been bookmarked. The displayed menu varies according to the service being selected. The menu icon is displayed while a station is being played. When only this icon is displayed, pressing Enter will display the menu on the screen.

  • Page 52: Spotify

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Spotify Use your phone, tablet or computer as a remote control for Spotify. Go to spotify.com/connect to learn how. Front Panel≫ Rear Panel≫ Remote≫...

  • Page 53: Airplay

    Confirm that this unit and the PC are connected to the same network beforehand. Then, press NET on this unit. Next, click the AirPlay icon iTunes, select this unit from the displayed devices, and start play of a music file. iPhone Integra DRX-2.3 XXXXXX e.g., iOS 10 Front Panel≫ Rear Panel≫ Remote≫...

  • Page 54: Dts Play-Fi

    "Group playback" that plays the same music in separate • To use a music streaming distribution service, user registration may be rooms at home. To enjoy this function, download Integra Music Control App required. (available on iOS or Android™).

  • Page 55: Flareconnect Tm

    ≫ ≫ FlareConnect When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can enjoy the group playback that plays the same music on multiple audio products supporting the FlareConnect function.

  • Page 56: Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ USB Storage Device You can play music files stored on a USB storage device. Basic Operations Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2.
  • Page 57 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • To return to the previous screen, press • To display an album title, artist name and album art of a file in WAV format, make the folder structure and file names as shown below when saving music files.

  • Page 58: Device And Supported Format

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Device and Supported Format USB Storage Device Requirements WAV (.wav/.WAV): WAV files contain uncompressed PCM digital audio. • This unit can use USB storage devices that comply with the USB mass • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, storage class standard.

  • Page 59: Playing Back Files On A Pc And Nas (Music Server)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing back files on a PC and NAS (Music Server) Streaming play of music files stored on PCs or NAS devices connected to the same network as this unit is supported. • The network servers supported by this unit are PCs that incorporate players equipped with the server functions such as Windows Media Player 11 or 12, or NASes ®...

  • Page 60: Playing Back

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back Perform the following procedure when this unit is on. 1. Switch the input on the TV to the input connected to the unit. TV’s REMOTE 2. Start the server (Windows Media Player 11, Windows Media Player 12, or ®...
  • Page 61 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 6. Select the target server with the cursors, and press Enter to display the items Player 12, it must be configured beforehand. list screen. Setting PC • This unit cannot access pictures and videos stored on servers. 1.
  • Page 62 Contents Connections Playback Setup ≫ ≫ ≫ ≫ – It is playing a music file on a USB storage device. • Depending on the version of Windows Media Player, the names of items to ® select may differ from the above description. ❏...

  • Page 63: Supported Audio Formats

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats This unit supports the following music file formats. Remote play of FLAC and Apple Lossless (.m4a/.mp4/.M4A/.MP4): DSD is not supported. • Supported sampling rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz •...

  • Page 64: Play Queue

    Or, select the "NET" input, and tap the "USB" icon or "Music Server" icon. (Depending on the model, the icon names may be different.) When downloading Integra Control Pro (available on iOS or Android™) to mobile devices, such as a smartphone and tablet, you can save your favorite playlist...

  • Page 65: Sort And Delete

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If there are no tracks on the Play Queue list, only "Play Now " is 3. To delete a track, slide the track to the left until the trash icon changes to " ".

  • Page 66: Amazon Music

    Network menu and select 5. Tap "NET" or "NETWORK" at the top of the Integra Control Pro screen, and "Amazon Music" from the menu. Front Panel≫ Rear Panel≫ Remote≫...

  • Page 67: Connecting Your Unit To A Sonos System

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Connecting your Unit to a Sonos System Setting up your Unit to work with the Once your unit is connected to the Sonos Connect you will be able to send any music or source on your Sonos App to the unit. By going through the Sonos Sonos Connect Connect, you can play your unit through other Sonos devices in the network in the same group, or you can just play on your unit.

  • Page 68: Now The Fun Part - Listening To Sonos On Your Unit

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Now the fun part - listening to Sonos on your Unit 1. Using your Sonos App select the music you want to listen to and send it to the room (or group) where your unit is located. We recommend naming your unit / Sonos Connect combination a friendly name like TV Room or Living Room where the equipment is located.

  • Page 69: Listening To The Am/Fm Radio

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening To the AM/FM Radio You can receive AM and FM radio stations on this unit with the built-in tuner. Tuning into a Radio Station Perform the following procedure when this unit is on. Tuning Automatically 1.
  • Page 70 Contents Connections Playback Setup ≫ ≫ ≫ ≫ When FM broadcasts reception is poor: Perform the procedure for "Tuning Manually" ( p70). Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.

  • Page 71: Presetting A Radio Station

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Presetting a Radio Station Registration Procedure You can preset up to 40 of your favorite AM/FM radio stations. After tuning in to the AM/FM radio station you want to register, perform the following procedure.
  • Page 72 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Selecting a Preset Radio Station 1. Press Tuner. 2. Press the cursors to select a preset number. Deleting a Preset Radio Station 1. Press Tuner. 2. Press the cursors to select the preset number to delete. 3.

  • Page 73: Using Rds (Australian And Asian Models)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Using RDS (Australian and Asian models) RDS stands for Radio Data System, and is a method of transmitting data in FM • If no stations are found, the message "Not Found" is displayed. radio signals.

  • Page 74: Multi-Zone

    "BLUETOOTH". You cannot select different stations of AM/FM broadcasts for the main room and separate room. Integra Control Pro is useful for the multi-zone playback operation. Download Integra Control Pro (available on iOS or Android™) to a mobile device, such as a smartphone and tablet to use it.

  • Page 75: Playing Back

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Playing Back In the remote controller operation, while pressing and holding the Zone 2 Shift button on the remote controller, operate with each button. 1. Point the remote controller at the unit, and while pressing and holding the Zone 2 Shift button on the remote controller, press .
  • Page 76 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • DSD audio signals cannot be output to ZONE 2 when selected with the "NET" input selector. • If ZONE 2 is on, power consumption during standby will increase. To set the function to off: While pressing and holding Zone 2 Shift button, press .

  • Page 77: Zone B Playback

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ZONE B Playback While performing playback through speakers (ZONE A) connected to the unit, you can enjoy the audio of the same source with the pre-main amplifier (ZONE B) connected to the ZONE B LINE OUT jack at the same time. Playing Back 1.

  • Page 78: Convenience Functions

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Convenience functions Adjusting the tone Adjusting Treble/Bass You can adjust the sound quality of the speakers. 1. Press Treble or Bass to select the setting to adjust. Treble: Enhances or moderates the high-tone range of the speakers. Bass: Enhances or moderates the low-tone range of the speakers.

  • Page 79: Sleep Timer

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Sleep Timer You can allow the unit to enter standby automatically when the specified time has elapsed. Press Sleep button on the remote controller to select the time from "30 min", "60 min"...

  • Page 80: Listening Mode

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode This unit is equipped with a variety of listening modes, and you can select the optimum listening mode for movies, TV, music, and games by pressing Movie/TV, Music, and Game. Selecting a Listening mode 1.
  • Page 81 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Checking the input format and listening mode Pressing button on the remote controller or INFO button on the main unit repeatedly will switch the display of the main unit in the following order. •...

  • Page 82: Speaker Layouts And Selectable Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker Layouts and Selectable Listening Modes See the following table for selectable listening modes for each speaker layout. Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch...
  • Page 83 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch (*3) (*3) (*3) ES Discrete (DTS-ES Discrete) ES Matrix (DTS-ES Matrix) DTS 96/24 (*3) (*3)
  • Page 84 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Speaker layout Listening mode 2.1 ch 3.1 ch 4.1 ch 5.1 ch 6.1 ch 7.1 ch 2.1.2 ch 3.1.2 ch 4.1.2 ch 5.1.2 ch Multich (Multichannel) (*1) (*1) (*1) (*1) (*1) (*3) (*3) (*3) (*1)

  • Page 85: Listening Mode Effects

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Listening Mode Effects Updating of listening modes Atmos „ Listening modes such as DTS Virtual:X, Atoms 2.0 and DSur 2.0 are (Firmware version supporting Atmos 2.0, etc.) added when the firmware is updated after purchase or the firmware is switched Since this mode calculates the positional data of audio recorded in Dolby Atmos in the product production process.
  • Page 86 Contents Connections Playback Setup ≫ ≫ ≫ ≫ DD (Dolby Audio - DD) surround channel or height channel is virtually created for expansion playback. „ • This mode cannot be selected when DTS signal is input. This mode faithfully reproduces the sound design recorded in the Dolby Digital According to the speaker layout, the following listening modes are displayed.
  • Page 87 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ DTS-HD HR (DTS-HD High Resolution) by setting the output on the player side to the PCM output. • This listening mode cannot be selected if the output setting on your Blu-ray This mode faithfully reproduces the sound design recorded in the DTS-HD High Disc/DVD player is not set to DSD.
  • Page 88 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Game-Action are connected. • This mode cannot be selected when "Speaker Virtualizer" ( p112) is set to This mode is suitable for games with a lot of action. "Off" (Default: On). „...
  • Page 89 Contents Connections Playback Setup ≫ ≫ ≫ ≫ even with only two or three speakers. This works by controlling how sounds reach the listener’s left and right ears. • This mode cannot be selected when "Speaker Virtualizer" ( p112) is set to "Off"...

  • Page 90: Input Formats And Selectable Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Formats and Selectable Listening Modes „ Movie/TV button You can select a variety of listening modes Input Format Listening Mode according to the audio format of the signal to be Multich PCM Direct input.
  • Page 91 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct Direct DTHD Direct DTHD *1 *2 *1 *2 *1 *2 DSur DSur DSur DTS Neural:X TV Logic TV Logic DTS Virtual:X AllCh Stereo AllCh Stereo...
  • Page 92 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS 96/24 Direct DTS-HD HR Direct DTS-ES Direct DTS 96/24 DTS-HD HR *1 *2 *1 *2 DTS Neural:X DTS Neural:X ES Matrix DTS Virtual:X DTS Virtual:X...
  • Page 93 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Music button Input Format Listening Mode Input Format Listening Mode Multich PCM Direct Direct Input Format Listening Mode Stereo Stereo Analog Direct Multich *1 *2 Stereo DSur DSur DSur DTS Neural:X DTS Neural:X DTS Neural:X DTS Virtual:X...
  • Page 94 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct DTHD Direct DTS 96/24 Direct Stereo Stereo Stereo DTHD DTS 96/24 *1 *2 *1 *2 *1 *2 DSur DSur DTS Neural:X Orchestra Orchestra...
  • Page 95 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Express Direct DTS-HD HR Direct DTS-HD MSTR Direct Stereo Stereo Stereo DTS Express DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 *1 *2 DTS Neural:X...
  • Page 96 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Game button Input Format Listening Mode Input Format Listening Mode DTS-ES Direct Direct Input Format Listening Mode Music files (except DSD/ Stereo DSur Analog Direct Dolby TrueHD) DTS Neural:X DSur ES Matrix DTS Virtual:X *2 *3 DTS Neural:X...
  • Page 97 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Multich PCM Direct Direct Direct Multich *1 *2 *1 *2 DSur DSur DSur DTS Neural:X DTS Neural:X Game-RPG DTS Virtual:X DTS Virtual:X Game-Action *2 *3...
  • Page 98 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode Direct Direct DTS 96/24 Direct DTS 96/24 *1 *2 *3 *1 *2 *1 *2 DSur DTS Neural:X DTS Neural:X Game-RPG DTS Virtual:X DTS Virtual:X *4 *5...
  • Page 99 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode Input Format Listening Mode DTS Express Direct DTS-HD HR Direct DTS-HD MSTR Direct DTS Express DTS-HD HR DTS-HD MSTR *1 *2 *1 *2 *1 *2 DTS Neural:X DTS Neural:X DTS Neural:X...
  • Page 100 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Input Format Listening Mode Input Format Listening Mode DTS-ES Direct DTS:X Direct DTS:X ES Matrix DTS Virtual:X *1 *2 ES Discrete Game-RPG DTS Neural:X Game-Action DTS Virtual:X Game-Rock *3 *4 Game-RPG Game-Sports Game-Action AllCh Stereo Game-Rock...

  • Page 101: Setup Menu

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setup Menu Menu list You can configure advanced settings to have a more enjoyable experience with this unit. For operation details, refer to "Menu operations". ( p103) 1. Input/Output 1. TV Out / OSD Make settings for TV output and On-Screen Displays (OSD) that appear on the TV.
  • Page 102 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Listening Mode 1. BD/DVD Preset the favorite listening mode when "BD/DVD" input is selected. p115 Preset 2. GAME Preset the favorite listening mode when "GAME" input is selected. p115 3. CBL/SAT p115 Preset the favorite listening mode when "CBL/SAT"...

  • Page 103: Menu Operations

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Menu operations Use the on-screen displays (OSD) that appear on the TV to make the settings. Press on the remote controller to display the Setup menu. Setup 1. Input/Output Assign 1. TV Out / OSD 2.

  • Page 104: Input/Output Assign

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Input/Output Assign Setting Item Default Value Setting Details Super Resolution When you have set "1080p -> 4K Upscaling" to „ 1. TV Out / OSD "Auto", you can select the degree of video signal correction from "Off"...
  • Page 105 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. HDMI Input Setting Item Default Value Setting Details Mini Player OSD Always On You can display on the TV the images from another Change input assignment between the input selectors and HDMI IN jacks. input selected last while playing the audio from NET or BLUETOOTH input.
  • Page 106 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Video Input Setting Item Default Value Setting Details "HDMI 1 (HDCP 2.2)" to "HDMI 6 (HDCP 2.2)": Change input assignment between the input selectors and COMPONENT VIDEO Assign a desired HDMI IN jack to the TV button. If IN jacks and the VIDEO IN jacks.
  • Page 107 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 4. Digital Audio Input „ 5. Analog Audio Input Change input assignment between the input selectors and DIGITAL IN COAXIAL/ Change input assignment between the input selectors and AUDIO IN jacks. If you OPTICAL jacks.

  • Page 108: Speaker

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 2. Speaker Setting Item Default Value Setting Details Bi-Amp Set whether the front speakers are bi-amp „ 1. Configuration connected. "No": When front speakers are not bi-amp Change the settings of connection environment of the speakers. connected "Yes": When front speakers are bi-amp connected Setting Item...
  • Page 109 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Center 100 Hz Select the crossover frequency from "40 Hz" to Surround Back 100 Hz Select the crossover frequency from "40 Hz" to "200 Hz"...
  • Page 110 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Distance • The unit of distance can be changed by pressing the Mode button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from Set the distance from each speaker to the listening position.
  • Page 111 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 6. Equalizer Settings Setting Item Default Value Setting Details Surr Back Left 0 dB Select a value between "-12 dB" and "+12 dB" You can adjust the output volume of the range for each connected speaker. (in 1 dB increments).

  • Page 112: Audio Adjust

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 3. Audio Adjust Setting Item Default Value Setting Details Subwoofer 0.0 dB After selecting the speaker frequency between „ 1. Multiplex/Mono "25 Hz" and "160 Hz" with the cursors / , adjust the volume of that frequency between "-6.0 dB"...
  • Page 113 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. DTS „ 5. Volume Change the setting of when DTS signals are input. Change the Volume settings. Setting Item Default Value Setting Details Setting Item Default Value Setting Details DTS Auto When inputting DTS signals that include extended Mute Level -∞...

  • Page 114: Source

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 4. Source • To name a preset radio station, press Tuner on the remote controller, select AM/FM, and select the preset number. • This cannot be set if the "NET" or "BLUETOOTH" input is selected. „...

  • Page 115: Listening Mode Preset

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 5. Listening Mode Preset Setting Item Default Value Setting Details PCM Fixed Mode Select whether to fix input signals to PCM (except multi-channel PCM) when you select "HDMI", You can preset your favorite listening mode to each input. (For example, you can "COAXIAL", or "OPTICAL"...

  • Page 116: Hardware

    • When this function is set to "On", the power can switch the input of the unit using the remote consumption in standby state increases, controller or the Integra Control Pro even in the however, the increase in power consumption is standby mode.
  • Page 117 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 2. Network Setting Item Default Value Setting Details Audio TV Out You can enjoy audio through the speakers of the Change the settings of the Network function. TV while this unit is on. •...
  • Page 118 AirPlay ® 1. Press Enter to display the Edit screen. Friendly Name Integra DRX-2.3 Change the model name of this unit which is 2. Select a character or symbol with the cursors, XXXXXX displayed on the device connected to the network and press Enter.
  • Page 119 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 3. Bluetooth Setting Item Default Value Setting Details Device Displays the name of the BLUETOOTH-enabled Change the settings for the Bluetooth function. device connected to the unit. • The name is not displayed when "Status" is Setting Item Default Value Setting Details...
  • Page 120 Integra Control Pro that can devices equipped with 12V trigger input jack. control this unit.
  • Page 121 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details GAME Main Set the 12V trigger output setting to each input. Main Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "GAME"...
  • Page 122 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 6. 12V Trigger B Setting Item Default Value Setting Details TUNER Main Set the 12V trigger output setting to each input. Set when outputting the control signal (maximum 12 V/25 mA) through the 12V "Off": No output TRIGGER OUT B jack.
  • Page 123 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details STRM BOX Zone 2 Set the 12V trigger output setting to each input. Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "STRM BOX"...
  • Page 124 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details BLUETOOTH Zone 2 Set the 12V trigger output setting to each input. CBL/SAT Main/Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "BLUETOOTH"...
  • Page 125 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Setting Item Default Value Setting Details Setting Item Default Value Setting Details Main/Zone 2 Set the 12V trigger output setting to each input. Main/Zone 2 Set the 12V trigger output setting to each input. "Off": No output "Off": No output "Main": Output when "CD"...

  • Page 126: Multi Zone

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ 7. Multi Zone Setting Item Default Value Setting Details Connected Device - Displays the Sonos Connect connected to the „ 1. Zone 2 same network as the network of this unit. Press the Enter button to select the connected Sonos Change the settings for Zone 2.

  • Page 127: Miscellaneous

    Setting Details „ 4. Initial Setup Remote ID If multiple Integra/ONKYO products are installed in the same room, select the ID for the remote control used with this unit from "1", "2" and "3" to prevent Make the initial setup from the setup menu.
  • Page 128 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ 6. Factory Reset All the settings are restored to factory defaults. Setting Item Default Value Setting Details Factory Reset All the settings are restored to factory defaults. Select "Start", and press the Enter button. •...

  • Page 129: Quick Menu

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Quick Menu Menu operations You can quickly adjust the settings you frequently use, such as tone adjustments, etc. You can make the settings on the TV screen during playback. Press Q on the remote controller to display the Quick Menu.
  • Page 130 Contents Connections Playback Setup ≫ ≫ ≫ ≫ • If you set the unit to the standby mode, the adjustments you made will be Center Spread: Adjust the width of the sound field of the front channel when restored to the previous statuses. playing in the Dolby Audio - DSur listening mode.

  • Page 131: Web Setup

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Web Setup Menu operations You can make the settings for the network function of this unit using an Internet Network Connection: You can select a network connection method. If you select browser on a PC, smartphone, etc. "Wireless", select an access point from "Wi-Fi Setup"...

  • Page 132: Initial Setup With Auto Start-Up Wizard

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Initial Setup with Auto Start-up Wizard Operations When you turn the unit on for the first time after purchase, the Initial Setup screen is automatically displayed on the TV to allow you to make settings required for TV’s REMOTE startup using simple operations following on-screen guidance.
  • Page 133 Contents Connections Playback Setup ≫ ≫ ≫ ≫ 1. Place the supplied speaker setup microphone at the listening position, and • To perform the Initial Setup again after the setting is completed, press connect it to the Setup Mic jack on the main unit. select "8.
  • Page 134 Contents Connections Playback Setup ≫ ≫ ≫ ≫ "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS device with this unit.
  • Page 135 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Tuner „ BLUETOOTH function Before starting the procedure „ Network function Problems may be solved by simply turning the power on/off or disconnecting/ „ USB storage device connecting the power cord, which is easier than working on the connection, setting and operating procedure.

  • Page 136: When The Unit Is Operating Erratically

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ When the unit is operating erratically ❏ Try restarting the unit Restarting this unit may solve the problem. After turning the unit to standby mode, press and hold the On/Standby button of the main unit for at least 5 seconds, and then restart the unit.

  • Page 137: (This Resets The Unit Settings To The Default)

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Resetting the unit (this resets the unit settings to the default) If the restart of the unit does not solve the problem, reset the unit, and restore all the settings to the factory default at the time of purchase. This may solve the problem. If the unit is reset, your settings are restored to the default values.

  • Page 138: Troubleshooting

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Troubleshooting „ Power ❏ When the power is turned on, "AMP Diag Mode" appears on the display of the main unit. • The protection circuit function may have operated. If the unit suddenly enters the standby state and "AMP Diag Mode" appears on the display of the main unit when the power is turned on again, this function is diagnosing whether or not the main unit is malfunctioning or there is an abnormality with the speaker cable connection.
  • Page 139 Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ No sound from a connected player • Change the input selector on this unit to the position of the terminal to which the player is connected. • Check the digital audio output setting on the connected device. On some game consoles, such as those supporting DVD, the default setting may be off.

  • Page 140: X84; Listening Modes

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Sound suddenly reduces • When using the unit for extended periods with the temperature inside the unit exceeding a certain temperature, the volume may be reduced automatically to protect the circuits. ❏...

  • Page 141: X84; Video

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Video • Confirm that the connection between the output jack on the connected device and the input jack on this unit is correct. • Make sure that none of the connecting cables are bent, twisted, or damaged. •...

  • Page 142: X84; Tuner

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Tuner ❏ Poor reception or much noise • Recheck the antenna connection. p42) • Move the antenna away from the speaker cord or power cord. • Move the unit away from your TV or PC. •...

  • Page 143: X84; Network Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network function • If you cannot select a network service, start up the network function to select it. It may take approx. one minute to start it up. • When the NET indicator is blinking, this unit is not properly connected to the home network. •...

  • Page 144: X84; Usb Storage Device

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ USB storage device ❏ USB storage device is not displayed • Check if the USB storage device or USB cable is securely inserted to the USB port of the unit. p56) •...

  • Page 145: X84; Zone B Function

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ ❏ Playback sound is interrupted, or communication is not possible • You may not receive radio waves due to poor radio wave conditions. Shorten the distance from the wireless LAN router, or remove obstacles to improve visibility, and connect again.

  • Page 146: X84; Display

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Display ❏ The display does not light up • When the Dimmer function is working, the display may go dim. Press the Dimmer button, and change the brightness level of the display. p11) „...

  • Page 147: Reducing The Power Consumption In Standby State

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ Reducing the Power Consumption in Standby State When the following functions are enabled, the power consumption in standby state increases. To reduce the power consumption in standby state, check each setting and set the functions to "Off". –...

  • Page 148: About Hdmi

    HDCP standards. Operation has been confirmed on the following devices: (As of January 2019) Toshiba brand televisions; Sharp brand televisions; Onkyo and Integra brand RIHD-compatible players; Toshiba brand players and recorders; Sharp brand players and recorders (when used with a Sharp brand television)
  • Page 149 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Supported Audio Formats 2 ch linear PCM: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Multi-channel linear PCM: Maximum 7.1 channels, 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 16/20/24 bit Bitstream: Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS, DTS:X, DTS-...

  • Page 150: General Specifications

    Contents Connections Playback Setup ≫ ≫ ≫ ≫ General Specifications „ Amplifier Section Signal to Noise Ratio 106 dB (IHF-A, LINE IN, SP OUT) Rated Output Power (FTC) (North American) 80 dB (IHF-A, PHONO IN, SP OUT) With 8 ohm loads, both channels driven, from 20-20,000 Hz; rated 80 watts Speaker Impedance per channel minimum RMS power, with no more than 0.08% total harmonic 4 Ω...
  • Page 151 Contents Connections Playback Setup ≫ ≫ ≫ ≫ „ Network Section „ General Ethernet LAN Power Supply 10BASE-T/100BASE-TX AC 120 V, 60 Hz (North American) Wireless LAN AC 220 - 240 V, 50/60 Hz (Others) IEEE 802.11 a/b/g/n standard Power Consumption (Wi-Fi standard) 460 W (North American)
  • Page 152 Contents Connections Playback Setup ≫ ≫ ≫ ≫ Audio Format Speaker Outputs Dolby Atmos, Dolby TrueHD, Dolby Digital, Dolby Digital Plus, DTS, DTS:X, FRONT L/R, CENTER, SURROUND L/R, HEIGHT 1 L/R or SURROUND DTS-HD Master Audio, DTS-HD High Resolution Audio, DTS 96/24, DTS- BACK L/R, ZONE 2 L/R (North American models are compatible with ES, DTS Express, DSD, PCM banana plugs.)
  • Page 153 SN 29403647_EN (C) Copyright 2019 Onkyo & Pioneer Corporation Japan. All rights reserved. http://www.onkyo.com/privacy/ H1902-0...

Table of Contents