Integra DRX-7.1 Basic Manual page 6

> Before Start > Part Names
13.12V 1A INPUT jack / ON/OFF switch: Used for
connection with the HDBaseT Receiver. Refer to the
Instruction Manual included with the HDBaseT
Receiver for usage instructions.
14.AC INLET: The supplied power cord is connected.
15.RS232 port: For connection to the home control
system. (*)
16.IR IN/OUT port: Allows you to connect a multiroom
remote control kit. (*)
17.12V TRIGGER OUT A/B/C jacks: Allows you to
connect a device with 12V trigger input jack to enable
link operation between the device and the unit. (*)
18.TUNER AM/FM 75≠ terminal: The supplied antennas
are connected.
19.SPEAKERS terminals: Use a speaker cable to connect
multichannel speakers for the main room and speakers
for a separate room (ZONE 2/ZONE 3). (North
American models are compatible with banana plugs.)
20.SUBWOOFER PRE OUT jacks: Connect a powered
subwoofer with a subwoofer cable. Up to two powered
subwoofers can be connected. You can set the volume
levels of the 2 powered subwoofers to different levels.
21.PRE OUT jacks: Connect a power amplifier. (*)
22.IR IN/OUT jacks: Used for connection with the
HDBaseT Receiver. Refer to the Instruction Manual
included with the HDBaseT Receiver for usage
instructions.
6
> Install > Initial Setup










> Playback
Remote Controller
1. Í On/Standby button
2. Input selector buttons: Switches the input to be played.
3. Q (Quick Menu) button: Settings such as "Tone" and "Level" can be made quickly
during play on the TV screen. "Other" has settings to switch HDMI output (P16).
(*)
4. Cursor buttons and Enter button: Select the item with the cursors and press Enter
to confirm your selection. When the folder or file lists are not shown on one

screen on the TV, press  /  to change the screen.
5. button: You can show advanced setting items on the TV and display to
provide you with an even better experience. (*)

6. Volume buttons
7. button: Temporarily mutes audio. Press again to cancel muting.
8. Listening Mode buttons: Allows you to select the listening mode (P34). (*)
Main/Zone 2/Zone 3 buttons: Controls the multi-zone function (P32).
9. Play buttons: Used for play operations when playing Music Server or USB.
10. button: You can start repeat/random play of the Music Server or USB.
Each time you press the button, the mode switches from
(folder repeat), to (random).

Clear button: Deletes all characters you have entered when entering text on the
TV screen.
11. Dimmer button: You can adjust the brightness of the display in three steps. It
cannot be turned off completely.
12. button: Switches the information on the display and is used to operate RDS
(P31).
13. button: Returns the display to the previous state.
14.Mode button: Switches tuning to an AM/FM station between automatic tuning and
manual tuning (P30), and also used to control the multi-zone feature (P32).
15.Memory button: Used to register AM/FM radio stations.
Tips


> Advanced Manual
Troubleshooting | Supplementary Information, etc.
(*)You can find details in the Advanced Manual.
(1-track repeat), to
When the remote controller isn't working: The
remote controller may have switched to the mode
for controlling ZONE 2 or ZONE 3. While holding
down Mode, press Main for 3 seconds or more
until the remote indicator flashes once to switch it
to the mode to control the main room.