Integra DRX-7.1 Basic Manual page 23

> Before Start > Part Names
BD/DVD
(*) Depending on the combination of speakers, you
may need to connect to other jacks. See "Points to
note with speaker combinations" (P13) for details.
a Analog Audio Cable, b Speaker Cable
> Install > Initial Setup
b
a
LINE
IN
ZONE 3 PRE/LINE OUT
> Playback
8. Multi-zone Connection-3 (ZONE 3 PRE/
LINE OUT / ZONE 3 SPEAKER)
Along with the main room and ZONE 2, you can also enjoy
audio in yet another room (ZONE 3).
Connections with an AV component
To output the audio of an external AV component to ZONE
3, connect using an analog audio cable. Output to ZONE 3
is not possible when you connect with an HDMI cable or
digital optical/coaxial cable.
ZONE 3 PRE/LINE OUT
It is possible to play 2 ch sources in a separate room while
sources with a maximum of 11.1 ch are being played in the
main room. Connect the ZONE 3 PRE/LINE OUT jacks of
the unit and the LINE IN jacks of the pre-main amplifier or
MAIN ROOM
the power amplifier in a separate room with an analog audio
cable.
ZONE 3 SPEAKER
ZONE3
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 During ZONE 3 playback, no sound is heard from the
surround back speakers or the height speakers and a
maximum of 5.1 channel playback is possible in the main
room.
ZONE 3 SPEAKER
> Advanced Manual
Troubleshooting | Supplementary Information, etc.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (P26) to enjoy this feature.
23
En