Integra DRX-7.1 Basic Manual page 61

> Specifications > Advanced Setup
• Wait for a while if "Network" cannot be selected. It will appear when the network feature is started.
> Listening Modes > Network Functions
■ 3. Power Management
Setting Item
Sleep Timer
Auto Standby
Auto Standby in
HDMI Standby
Through
> Basic Manual
Troubleshooting |
Default Value Setting Details
Off Allows the unit to enter standby automatically when
the specified time elapses. Select a value from "30
minutes", "60 minutes", and "90 minutes".
"Off": Does not turn the unit to standby
automatically.
On/Off This setting places the unit on standby
automatically after 20 minutes of inactivity without
any video or audio input. (When "Network Standby"
is on, this becomes the Hybrid Standby mode
which reduces the increase in power consumption
to a minimum.)
"On": The unit will automatically enter standby
mode ("AUTO STBY" will light.)
"Off": The unit will not automatically enter standby
mode.
• "Auto Standby" is displayed on the display and
TV screen 30 seconds before the Auto Standby
comes on.
• "Auto Standby" does not work when Zone 2/
Zone 3 is active.
• Default values vary depending on the regions.
Off Enable or disable "Auto Standby" while "HDMI
Standby Through" is on.
"On": The setting will be enabled.
"Off": The setting will be disabled.
• This setting cannot be set to "On" if "Auto
Standby" and "HDMI Standby Through" are set
to "Off".
Supplementary Information, etc.
25