Integra DRX-7.1 Basic Manual page 59

> Specifications > Advanced Setup
Setting Item Default Value
Audio TV Out Off
Audio Return Auto (＊)
Channel
Auto Lip Sync On
> Listening Modes > Network Functions
Setting Details
You can enjoy audio through the speakers of the
TV while this unit is on.
"On": When this function is to be used
"Off": When this function is not to be used
• This setting is fixed to "Auto" if you have set
"1. Input/Output Assign" - "TV Out/OSD" -
"HDMI Out" or "Other" - "HDMI Out" in the
"Quick Menu" to "MAIN" or "MAIN+SUB" and
"HDMI CEC" is set to "On". If you change this
setting, set "HDMI CEC" to "Off".
• Listening mode cannot be changed while "Audio
TV Out" is set to "On" and audio is being output
through the speakers of the TV.
• Depending on your TV set or input signal of the
component, audio may not output through the
speakers of the TV even if this setting is set
to "On". In such case, audio is output from the
speakers of the unit.
• If you operate the Master Volume dial on this
unit when audio that is being input through this
unit for output from the TV speakers, audio
is output from this unit. If you do not want to
output audio from the unit, change the unit or TV
settings, or reduce the volume of the unit.
You can enjoy sound of the HDMI connected ARC
compatible TV through the speakers connected to
the unit.
＊ To use this function, set "HDMI CEC" to "On" in
advance.
"Auto": When enjoying the TV sound through the
speakers connected to the unit
"Off": When not using the ARC function
This setting automatically corrects any
desynchronization between the video and audio signals
based on data from the HDMI LipSync compatible TV.
"On": Automatic correction will be enabled
"Off": Automatic correction will be disabled
■ 2. Network
• When LAN is configured with a DHCP, set "DHCP" to "Enable" to configure the
setting automatically. ("Enable" is set by default) To assign fixed IP addresses to each
components, you must set "DHCP" to "Disable" and assign an address to this unit in
"IP Address" as well as set information related to your LAN, such as Subnet Mask and
Gateway.
Setting Item Default Value
-
MAC Address
DHCP Enable
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
DNS Server 0.0.0.0
-
Proxy URL
Proxy Port 8080
> Basic Manual
Troubleshooting | Supplementary Information, etc.
Setting Details
This is the MAC address of this unit.
This value is specific to the component and cannot
be changed.
"Enable": Auto configuration by DHCP
"Disable": Manual configuration without DHCP
• If selecting "Disable", you must set "IP Address",
"Subnet Mask", "Gateway", and "DNS Server"
manually.
Displays/Sets the IP address.
Displays/Sets the subnet mask.
Displays/Sets the gateway.
Displays/Sets the primary DNS server.
Displays/Sets the proxy server URL.
Displays/Sets the proxy server port number when
you enter "Proxy URL".
23