Integra DRX-7.1 Basic Manual page 44

> Specifications > Advanced Setup
Setting Item Default Value
Zone 2 HDMI Not Use
HDBaseT(TM) Not Use
OSD Language English
Impose OSD On
8
> Listening Modes > Network Functions
Setting Details
Make the setting when you output to the Zone 2 TV
connected to the HDMI OUT ZONE 2/SUB jack.
"Use": Enable this function
"Not Use": Disable this function
Set when outputting the input signals from the
HDBaseT port via an Ethernet cable.
"MAIN": When connecting the HDMI OUT MAIN
jack and the HDBaseT IN port
"SUB / ZONE 2": When connecting the HDMI OUT
SUB/ZONE 2 jack and the HDBaseT IN port
Select the on-screen display language from the
following.
English, German, French, Spanish, Italian, Dutch,
Swedish, Russian, Chinese
Set whether or not to display the information on
the TV when the volume is adjusted or input is
changed, for example.
"On": OSD displayed on the TV.
"Off": OSD not displayed on the TV.
• OSD may not be displayed depending on the
input signal even if "On" is selected. If the
operation screen is not displayed, change the
resolution of the connected device.
Troubleshooting
Setting Item Default Value Setting Details
Mini Player OSD Always On You can play on the TV the images from another
input selected immediately prior while you are
playing the audio from NET input. After switching
to NET, play the images and audio, then when you
press Mode on the remote controller, the image
is displayed in full-screen mode, and the audio
information (Mini Player) for NET is displayed in
the corner of the screen. You can set whether to
display this Mini Player on the screen all the time.
"Always On": The Mini Player is displayed all the
time.
"Auto Off": The Mini Player turns off automatically
30 seconds after being displayed. It is displayed for
30 seconds after operations such as changing the
volume.
Screen Saver 3 minutes Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes", "10
minutes" and "Off".
> Basic Manual
| Supplementary Information, etc.
• Each press of the Mode button displays or turns
off the video.
• This cannot be selected if "Impose OSD" is set
to "Off".