To change The Direction of Power Assistant Sensor Settings, press
the UP/DOWN button to select F or b.
To store a changed setting, press the MODE button and then access
settings mode of PAS sensitivity.
The Sensitivity of PAS Settings
SCN represents the sensitivity of PAS settings. The sensitivity value
ranges from "2" to "9". "2" is the strongest, "9" is the weakest. The default
value is "2".
To change the sensitivity of PAS settings, press the UP/DOWN button
to select sensitivity value.
To store a changed setting, press the MODE button and then
access magnet disk settings mode.
Magnet quantity Settings
N represents magnet numbers of PAS disk. The default value is 6.
To change magnet numbers of PAS disk, press the UP/DOWN
button to select quantity corresponding to PAS disk.
To store a changed setting, hold the MODE button and then return
to previous menu.
Direction of PAS Sensor Settings
The Sensitivity of PAS Settings
11