Mitsubishi Electric PUMY-P112VKM3 Technical & Service Manual page 51

8-1-1-2. Test run for wired remote controller <PAR-31MAA> <PAR-32MAA>
Select "Service" from the Main menu, and press the
1
Select "Test run" with the F1 or F2 button, and press the
Select "Test run" with the F1 or F2 button, and press the
2
Test run operation
Press the F1 button to go through the operation modes in the order of
"Cool and Heat".
Cool mode: Check the cold air blows out.
Heat mode: Check the heat blows out.
Press the button and open the Vane setting screen.
Auto vane check*
Check the auto vane with the F1
Check the operation of the outdoor unit fan, also.
Press the button to return to "Test run operation".
Press the button.
When the test run is completed, the "Test run menu" screen will appear.
The test run will automatically stop after 2 hours.
*The function is available only for the model with vanes.
OCH632A
button.
F2 buttons.
51
MENU RETURN SELECT
Function buttons
Test run
Input maintenance info.
Function setting
Check
Self check
button.
M a
F1
button.
Service menu:
F1
Test run
Cool
Mode
F1
F1
ON/OFF
F1 F2 F3 F4
S e v r c i e m e n u
n i m e n : u
C u s r r o
F2 F3 F4
Test run menu
Test run
Drain pump test run
Cursor
F2 F3 F4
Remain
Pipe
Auto
Switch disp.
Fan
F2 F3 F4
Remain
Vane
F2 F3 F4