Mitsubishi Electric PUMY-P112VKM3 Technical & Service Manual page 151

City multi series split-type, heat pump air conditioners
Hide thumbs Also See for PUMY-P112VKM3:
Table of Contents

Advertisement

PUMY-P112YKM3(-BS)
PUMY-P112YKME3(-BS)
OPERATING PROCEDURE
1. Removing the service panel and top panel
(1) Remove 3 service panel fixing screws (5 × 12) and
slide the hook on the right downward to remove the
service panel.
(2) Remove screws (3 for front, 3 for rear/5 × 12) of the
top panel and remove it.
2. Removing the fan motor (MF1, MF2)
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove 4 fan grille fixing screws (5 × 12) to detach
the fan grille. (See Photo 1)
(4) Remove a nut (for right handed screw of M6) to detach
the propeller. (See Photo 2.)
(5) Disconnect the connectors, CNF1 and CNF2 on out-
door multi controller circuit board in electrical parts
box.
(6) Remove 4 fan motor fixing screws (5 × 20) to detach
the fan motor. (See Photo 3)
3. Removing the electrical parts box
(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Disconnect the connecting wire from terminal block.
(4) Remove all the following connectors from outdoor multi
controller circuit board;
<Diagram symbol in the connector housing>
• Fan motor (CNF1, CNF2)
• Thermistor <HIC pipe> (TH2)
• Thermistor <Outdoor liquid pipe> (TH3)
• T hermistor <Compressor> (TH4)
• Thermistor <Suction pipe/Ambient>
(TH6/7)
• High pressure switch (63H)
• High pressure sensor (63HS)
• Low pressure sensor (63LS)
• 4-way valve (21S4)
• Bypass valve (SV1)
Pull out the disconnected wire from the electrical parts
box.
(5) Remove the terminal cover and disconnect the com-
pressor lead wire.
OCH632A
PUMY-P125YKM3(-BS)
PUMY-P125YKME3(-BS)
Photo 1
Grille fixing
screws
Grille fixing
screws
Photo 2
Propeller
Nut
Photo 4
Front panel fixing
screws (5x12)
Front
panel
fixing
screws
(4x10)
151
PUMY-P140YKM3(-BS)
PUMY-P140YKME3(-BS)
Note: Turn OFF the power supply before disassembly.
PHOTOS
Top panel fixing screws
Photo 3
Fan motor fixing screws
Front panel
Fan motor fixing screws
Electrical parts box
Terminal block
(TB1)
Front panel
fixing screws (5x12)
Continue to the next page
Top panel
Service panel
fixing screw
Service
panel
Slide
Fan grille
Service panel
fixing screws
Fan
motor
Noise filter
circuit board (NF)
Outdoor multi
controller circuit
board (MULTI.B)
Terminal block
(TB1B)
Terminal blocks
(TB3) (TB7)
Valve bed
fixing screws
Valve bed
Compressor (MC)
Terminal cover
Cover panel
(Front)
Cover panel
fixing screws

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents