Mitsubishi Electric PUMY-P112VKM3 Technical & Service Manual page 155

OPERATING PROCEDURE
13. Removing the reactor (DCL)
(1) Remove the service panel. (See Photo 1)
(2) Disconnect the lead wires from the reactor.
(3) Remove the 4 screws, that fix the reactor box.
(See Photo 13 or Figure 1)
(4) Remove the reactor box.
Note 1: The reactor is very heavy! Be careful when han-
dling it.
Note 2: PUMY-P•YKME3 model has 3 reactors.
OCH632A
PHOTOS & ILLUSTRATION
Photo 13: YKM3 model
Reactor box
Screws
Screws
Figure 1: YKME3 model
Screws
Screws
155
4-way valve
Reactor
4-way valve
Reactors