Sysex Dump; Sysex Send; Sysex Receive - Elektron Digitone User Manual

14.4 SYSEX DUMP

In the SYSEX DUMP menu, projects, patterns, and Sounds can be sent and received. Select a menu option
using [UP]/[DOWN] or the TRACK LEVEL knob. Press [YES] to open the highlighted menu selection.
When receiving or sending SysEx data, the MIDI ports or the USB port of the Digitone should be connected
to the external sending/receiving device.
If the Digitone is sending or receiving SysEx data through the MIDI ports, use the Elektron TM-1 USB MIDI
interface for up to 10x transfer speeds.
If the external device is a computer, we recommend using our free SysEx utility C6, which can be down-
loaded from the Elektron website.

14.4.1 SYSEX SEND

Here projects, patterns, and Sounds can be sent to an external device via the MIDI OUT port or the USB
port of the Digitone.
The column to the left selects what will be backed up. Select the column using the [LEFT] arrow key.
Use the [UP]/[DOWN] keys or the TRACK LEVEL knob to navigate in the column. The SysEx data send
alternatives located in the column to the right will change depending on the selection made in the left
column. Press the [RIGHT] arrow key to access this column. Use the [UP]/[DOWN] keys or the TRACK
LEVEL knob to select what will be sent. Press [YES] to initiate the SysEx send procedure.
PROJECT will send the active project (settings, patterns, Sounds in the Sound Pool) to the receiving
device.
PATTERN will send the selected pattern to the receiving device.
SOUNDS will send the selected Sound bank to the receiving device.
• Backing up your data regularly is important!
• Before initiating a SysEx send, first, make sure the receiving device is listening for data
to be sent.

14.4.2 SYSEX RECEIVE

Here projects, patterns, and Sounds can be received from an external device via the MIDI IN port or the
USB port of the Digitone.
14. GLOBAL SETTINGS MENU
63