Rng; Len; Arp Length; Offset - Elektron Digitone User Manual

9. PATTERNS AND SOUNDS

9.5.3 RNG

Range sets the octave range of the arpeggiator. After each completed arpeggiator cycle, the arpeggiat-
ed notes are transposed one octave up. When the notes have reached the octave offset specified by the
RNG setting the notes are reset to their initial values. From there the octave transpose is started all over
again.

9.5.4 LEN

Length controls the length of the arpeggiated notes.

9.7.5 ARP LENGTH

Turn DATA ENTRY knob F to elect the length of the arpeggio. The max length is 16 sequencer steps.

9.7.6 OFFSET

Offset selects the offset (note) value of the chosen arpeggiator step in semi-tones. The offset is from the
original note trig. The TRK KEY SCALE and TRK KEY NOTE settings found in the NOTES SETUP menu
affects the note values of the arpeggiated notes.
1. Press [LEFT] or [RIGHT] to select which arpeggiator step to offset.
2. Use DATA ENTRY knob E to set the offset.
3. Press [DOWN] to deacivate an arpeggiator step. Press [UP] to activate an arpeggiator step that
has been deactivated.
26