Amp - Elektron Digitone User Manual

11.8 AMP PAGE 1
The AMP page 1 controls parameters for the amplitude envelope, overdrive, tone, panning and volume.
Press [AMP] once to access this parameter page.
11.8.1 ATK
Attack Time sets the length of the attack phase of the amp envelope. (0–127)
11.8.2 DEC
Decay Time sets the length of the decay phase of the amp envelope. (0–127)
11.8.3 SUS
Sustain Level sets the sustain level of the amp envelope. (0–127)
11.8.4 REL
Release Time sets the length of the release phase of the filter envelope. (0–126, INF)
11.8.5 DRV
Overdrive sets the amount of overdrive and clipping distortion of the signal entering the filter.
(0.00–127.00)
11.8.6 PAN
Pan positions the sound in the stereo field. The knob function is bipolar with 0 being the balanced mid-
point, L64 sends all sound to the left channel, and R63 sends all sound to the right channel.
(L64–R63)
11.8.7 VOL
Volume sets the amount volume of the sound. This parameter is independent of the overall track level.
(0.00–127.00)
11.9 AMP PAGE 2
The AMP page 2 controls parameters for the effects sends and amp envelope reset
volume.
Press [AMP] twice to access this parameter page.
Attack Decay
Note On
TIME
11. SYNTH TRACK PARAMETERS
Release
Note Off
45