Reload From Proj; Import/Export; Metronome Menu; Scale Menu - Elektron Digitone User Manual

10.7.5 RELOAD FROM PROJ

You must have saved the pattern at least once before you can reload pattern information.
WHOLE PATTERN Reloads the active pattern's sequence data and four Sounds from the +Drive. A
prompt appears when you select this option. Press [YES] to reload, or [NO] to cancel the operation.
SOUNDS DATA Reloads the active pattern's four Sounds from the +Drive. A prompt appears when you
select this option. Press [YES] to reload, or [NO] to cancel the operation.
SEQUENCE DATA Reloads the active patterns all sequence data from the +Drive. A prompt appears
when you select this option. Press [YES] to reload, or [NO] to cancel the operation.

10.7.6 IMPORT/EXPORT

Here you can manage the sounds on the Digitone.
IMPORT SOUND Imports (copies) a sound from the +Drive to the active pattern. Turn the LEVEL/
DATA knob or press [UP]/[DOWN] to scroll through the list. Press [YES] to select a sound and then
press [TRACK 1–4] to select the track to where you want to assign the sound.
EXPORT SOUND Exports (saves) the active track's sound to the +Drive. Turn the LEVEL/DATA knob
or press [UP]/[DOWN] to choose a destination memory slot. Press [YES] to export the sound. Name
the sound and press [YES] again to confirm the export.
MANAGE SOUNDS Opens the SOUND MANAGER. For more information, please see "14.2.2 SOUND
MANAGER" on page 59.

10.8 METRONOME MENU

The METRONOME menu controls the internal metronome of the Digitone. Press [FUNCTION] + [PTN] to
open the METRONOME menu. Use the DATA ENTRY knobs to change the settings.
ACTIVE activates/deactivates the metronome. You can also press [FUNC] + [PTN] and hold for a sec-
ond to toggle the metronome on and off when you are not in the METRONOME menu.
TIME SIG. controls the note and beat measure of the metronome time signature.
PREROLL BARS controls for how many bars the metronome sounds before the sequencer starts play-
ing. This setting is only relevant when you are in LIVE RECORDING mode.
VOL. controls the volume of the click.

10.9 SCALE MENU

You can set the length and timing of the pattern and tracks in this menu. The SCALE menu has two modes.
In LENGTH PER PATTERN mode all tracks share the same length. In LENGTH PER TRACK mode, each
track can have different lengths. Press [FUNC] + [PAGE] to access the SCALE menu. Press [FUNC] +
[YES] to toggle between the two SCALE modes. Use the DATA ENTRY knobs to adjust the settings.

10.9.1 LENGTH PER PATTERN MODE

In this mode, all tracks of the pattern share the same length and time signature.
10. THE SEQUENCER
33