Table of Contents
Advertisement
Planning the SC8800-S AP Installation
AP Connectors and LEDs
AP Connectors and LEDs
Figure 5
identifies the top-panel connectors on the AP .
Figure 5.
Table 2.
Top-panel connectors
No.
Label
Description
1
5 GHz
5GHz 50-ohm N-type connector. Can be used with an external antenna for
ANT 0 port
operator-defined coverage areas and point-to-point deployments.
2
2.4 GHz
2.4GHz 50-ohm N-type connector. Can be used with an external antenna for
ANT 2 port
operator-defined coverage areas and point-to-point deployments.
3
2.4 GHz
2.4GHz 50-ohm N-type connector. Can be used with an external antenna for
ANT 0 port
operator-defined coverage areas and point-to-point deployments.
4
5 GHz
5GHz 50-ohm N-type connector. Can be used with an external antenna for
ANT 2 port
operator-defined coverage areas and point-to-point deployments.
Figure 6
identifies the AP bottom-panel connectors and LED locations on the AP .
describes these connectors and LEDs.
Top-panel connectors
4
3
2
1
Table 2
describes these connectors.
Table 3
6
Advertisement
Table of Contents
