Table of Contents
Advertisement
3
Preparing the SC8800-S AP at the Depot
and Shipping to the Field
Unpacking the AP
■
AP Connectors and LEDs
■
Powering the AP
■
Configuring the AP for Management by ZoneDirector
■
Configuring the AP for Management by FlexMaster or for Standalone Operation
■
Verifying AP Operation
■
Shipping the AP to the Field
■
Unpacking the AP
1. Open the ZoneFlex SC8800-S package, and then carefully remove the contents.
2. Return all packing materials to the shipping box, and put the box away in a dry location.
3. Verify that all items listed in
included in the package. Check each item for damage. If any item is damaged or
missing, notify your authorized Ruckus Wireless sales representative.
NOTE:
" Appendix A: Ruckus Wireless-Supplied and Customer-Ordered Parts"
page 61
includes pictures and descriptions of these and other factory-orderable and
customer-supplied parts.
Package Contents
A complete SC8800-S AP package contains all of the items listed below:
•
SC8800-S Outdoor Access Point
•
One AC power cable input end connector and cap
•
Two M 25 data cable glands
•
Service Level Agreement/ Limited Warranty Statement
•
Regulatory Statement
•
Registration card
•
Declaration of Conformity
•
This Installation Guide
•
Mounting kit (refer to
Preparing the SC8800-S AP at the Depot and Shipping to the Field
" Package Contents"
" Mounting Kit Contents"
Unpacking the AP
and
" Mounting Kit Contents"
for details)
are
on
13
Advertisement
Table of Contents
