Safety And Performance Standards - Cardiac Science POWER2HEART AED G3 Automatic 9300A Operation And Service Manual

AED SELF-TEST SEQUENCE
Frequency of Self-Test
Daily
Weekly
Monthly (every 28 days)
Open Lid (when lid is opened)
Close Lid (when lid is closed)
The FirstSave AED checks for presence of pads, not functionality.

SAFETY AND PERFORMANCE STANDARDS

AED MODELS 9300
The AED has been designed and manufactured to conform to the highest standards of safety and performance
including electromagnetic compatibility (EMC). The Cardiac Science AED Models 9300E/9300A/9300C and pads
conform to the applicable requirements of the following:
CE
CE Marked by NSAI 0050 per the Medical Device Directive 93/42/EEC of European Nations
ETL
Classified by ETL Semko with respect to electric shock, fire and mechanical hazards only in
accordance with UL 60601-1, CAN/CSA C22.2 No.601.1-M90, EN60601-1 and EN60601-2-4.
Conforms to UL Standard UL60601-1. Certified to CAN/CSA Standard C22.2 No. 601.1-M90.
Electrical, Construction, Safety and Performance
IEC 60601-1 (1998), Amendments 1 (1991) & 2 (1995)
IEC 60601-2-4 (2002)
ANSI/AAMI DF-39 (1993)
Electromagnetic Compatibility (EMC)
IEC 60601-1-2 (2001)
IEC 60601-2-4 Section 36
ANSI/AAMI DF-39 (1993) Section 3.3.21
page 50
What is Tested?
Battery, pads, internal electronics, SHOCK/CONTINUE button, and
software (no charge).
Battery, pads, internal electronics, SHOCK/CONTINUE button, and
software (partial charge).
Battery under load, pads, internal electronics, full-energy charge
cycle, SHOCK/CONTINUE button, and software (full charge).
Battery, pads, internal electronics, SHOCK/CONTINUE button,
and software.
Battery, pads, internal electronics, SHOCK/CONTINUE button,
and software.
112-2025-005 Rev B © 2003-2004 Cardiac Science, Inc. All rights reserved.