Cardiac Science POWER2HEART AED G3 Automatic 9300A Operation And Service Manual page 20

These protocols are selected by using our MDLink software program. The five biphasic energy protocols
available are as follows:
Energy
Protocols
Factory Default
Protocol #2
Protocol #3
Protocol #4
Protocol #5
The FirstSave AED will deliver Protocol 5 only, which is variable energy 200J.
1 The ultra-low current, low current and high current shocks are variable energy. The actual energy is determined by the patient's impedance.
© 2003-2004 Cardiac Science, Inc. All rights reserved.
Shock Energy
Sequence Level
1
1. 200VE
2. 300VE
3. 300VE
1. 200VE
2. 200VE
3. 300VE
1. 150VE
2. 200VE
3. 200VE
1. 150VE
2. 150VE
3. 200VE
1. 200VE
2. 200VE
3. 200VE
Section 2 - Introduction
Energy Range (J)
140J-250J
190J-360J
190J-360J
140J-250J
140J-250J
190J-360J
105J-195J
140J-250J
140J-250J
105J-195J
105J-195J
140J-250J
140J-250J
140J-250J
140J-250J
112-2025-005 Rev B page 19