Installing The Power Distribution Board (T-Docking) - HP server rx4610 Service Manual

Chapter 6
16. Disconnect the two 172 mm fan cables from the bottom side of the Power Distribution Board
(T-Docking). You can access these cables from the emptied Hard Drive Bay.
17. Lift the small handle mounted to the top of the Power Distribution Board (T-Docking) near the
Sideplane to disengage the Power Distribution Board (T-Docking) from the Sideplane.
18. Grasp the Power Distribution Board (T-Docking) by the right-rear edge and lift up to remove it
from the chassis.

Installing the Power Distribution Board (T-Docking)

Figure 57. Removing the Hard Drive Bay from the Chassis
Figure 58. Removing the Power Distribution Board (T-Docking)
Replacing Parts
134