Installing The 120 Mm Fans - HP server rx4610 Service Manual
Hide thumbs
Also See for server rx4610:
- User manual (249 pages) ,
- Installation manual (16 pages) ,
- Software installation manual (3 pages)
Table of Contents
Advertisement
Chapter 6
Installing the 120 mm Fans
Follow these steps to install a 120 mm fan:
1. Slide the server out of the rack far enough to expose the fan-access door on the top of the
chassis.
2. Unscrew the thumbscrew on the front of the fan-access door and lift the door open.
3. Slide the new fan into place, with the connector oriented to engage the socket inside of the fan
enclosure.
4. Push the fan assembly firmly into the enclosure to seat the connector.
5. Close the fan-access door and tighten the thumbscrew.
6. Slide the chassis back into the rack.
Replacing Parts
85
Advertisement
Table of Contents
Troubleshooting
