Setting In The Tech. Rep. Mode; Tech. Rep. Mode - Minolta Di200 Service Manual

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
4-4.

Setting in the Tech. Rep. Mode

(1)

Tech. Rep. Mode

• This function allows the Tech. Rep. to make various settings and adjustments.
1. System Set
• Set the environment for copying operations.
Touch Panel
Display
Auto Paper Select the paper size selection scheme for automatic original size
Configuration detection.
Inch/Metric
FLS Paper Set the size for FLS.
F: 330 mm
C: 203 mm
Simplex/Duplex
Select whether or not to enable the setting of 1-Sided
under Original.
plex&Duplex
Duplex Only
Dry Key Set Select whether to display the Dry key for "User Management" of Util-
ity.
Notes:
• Scanner, Scanner & Drum: "Dehumidify" key is displayed.
• Disable: "Dehumidify" key is not displayed.
Function Limit Select whether to limit the functions to be set on the control panel or
not.
OFF
Setting (The default is
The measurement is rounded to the nearest
standard inch or metric size.
The measurement is rounded to the nearest
Metric
standard metric size.
F: 330 mm
C: 210 mm
Copy Default available from User's Choice.
Sim-
Permits selection of all copying modes.
Permits selection of 2-sided copying modes
only.
Scanner Scanner&Drum
Enables the functions to set the number of copies to
ON be made, paper source, zoom ratio, and image den-
sity.
Enables all functions (no Limit)
S-18
Highlighted ).
F: 330 mm F: 330 mm
C: 216 mm C: 220 mm
1-Sided
Disable