Removal Of The Scanner - Minolta Di200 Service Manual

FrameMaker Ver.5.5E(PC) Di200/Di251/Di351 DIS/REASSEMBLY, ADJUSTMENT
01.02.09
(7)

Removal of the Scanner

1. Remove the Original Glass.
2. Remove the Rear Holding Bracket.
4011D037AA
4011D038AA
4011D039AA
Rear
4011D040AA
4011D041AB
3. Move the Scanner to the location shown in the
illustration.
4. Remove one screw and unplug the connector of
the Exposure Lamp.
5. Remove the flat cable of the Exposure Lamp.
6. Remove one screw and the Lamp Fixing Bracket.
7. Slide the Exposure Lamp to the front and remove
it.
Front
8. Remove two screws and the Scanner.
D-18