Void Areas - Minolta Di200 Service Manual

FrameMaker Ver.5.5(PC) Di200/Di251/Di351 TROUBLESHOOTING
01.01.17
(8)

Void Areas

Section Step
1 PC Drum is dirty.
2 Image Transfer Roller is dented or
scratchy.
Engine
3 Fusing Rollers are scratchy or
deformed.
1 Original Glass is dirty.
2 CCD2 Board and MFB2 Board are
connected properly.
IR
3 MFB2 Board and Master Board are
connected properly.
<Typical Faulty Images>
4011T523AA
Check Result
YES Clean.
NO
YES Clean or change.
NO
YES Clean.
NO
YES Change CCD Unit.
NO
T-55
Action
Change.
Change I/C.
Change Master Board.
Correct.
Change MFB2 Board.
Correct.