Minolta Di200 Service Manual page 87

FrameMaker Ver5.5E(PC) Di200/Di251/Di351 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.01.26
Touch Panel
Display
Multiple-in-1 and Select whether to enable or disable recalling a default zoom ratio for
Booklet Copy 2in1, 4in1, or Booklet Creation.
Zoom
Auto Panel Reset Select the time it takes the Auto Panel Reset function, which resets
the panel settings when the set period of time elapses after a copy
cycle has been completed or the last key operated, to be activated.
Energy Saver Select the time it takes the copier to enter the Energy Saver mode
Mode after a copy cycle has been completed or the last key operated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
Plug-In Counter, Select whether or not to reset the panel automatically when the
ID Key Reset Access Mode key is pressed (in the Copy Track mode) or the Plug-In
Counter is unplugged.
Auto Power Off Select the time it takes the Auto Shut Off function, which shuts down
the copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
Note:
• The option of "OFF" becomes available on the screen if "Yes" is
selected for "Disable Auto Shut off" of the "Admin. Management"
function.
Default: 35/25 CPM (60 min.), 20 CPM (30 min.)
LCD Back-light Off Set the time it takes the LCD backlight to turn OFF after a copy cycle
has been completed or the last key has been operated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
20 CPM: U.S.A. and Canada Only
Setting (The default is
ON
30 sec.
1 min.
3 min. 5 min.
1 to 240 min. (
ON
15 to 240 min.
1 to 240 min. (
S-10
Highlighted ).
OFF
2 min.
No Reset
)
15 min.
OFF
OFF
)
1 min.