Vacon 100 Installation Manual page 17

Commissioning
Sub-
Field name
index
1 Identifier (ID)
Number of array
2
elements
Standardisation
3
factor
4 Variable attribute
5 Reserved
6 Name
7 Low limit
8 High limit
9 Reserved
10 ID extension
Normalisation
11
reference parameter
12 Normalisation field
24-hour support +358 (0)201 212 575 • Email: vacon@vacon.com
Table 9. Parameter description
Data type
Unsigned16
Unsigned16
FloatingPoint
Array of two Unsigned8
Array of four Unsigned8
ASCII string, 16 characters
Array of four Unsigned8
Array of four Unsigned8
Array of two Unsigned8
Unsigned16
Unsigned16
Unsigned16
Description
A bitmask with information about the parameter
characteristics.
For array parameters, the number of elements
in the array.
If the information represented by the parameter
can be converted into some standardised form,
this field contains a factor for this conversion.
Contains two index numbers for describing the
parameter information.
Reserved, always 0.
Symbolic name of the parameter.
Limit for valid values of the parameter.
Limit for valid values of the parameter.
Reserved, always 0.
Not used, always 0.
Parameter number, the value of which is used
as normalisation reference for the parameter
whose description this is.
Contains information about normalisation of this
parameter.
vacon • 14
4