Table of Contents
Advertisement
Remote control feature programming
The Responder LC 2-way remote control has menus for configuring the remote
control user features and for programming the remote to the system control mod-
ule. Before you start make sure the keypad is unlocked. (See page 12)
To program the remote user features:
Press and hold the
indicator at 3 seconds). The status screen clears and "Main Menu" is displayed
in the text display area of the screen.
A U
X
Release the
button to display the Remote Options menu.
Options
Remote Setup
Sensor Adjust
Pair Remote
Demo Mode
Exit
Press the
button to scroll up, and press the
AUX
main menu.
From the Main Menu, once a feature name is displayed in the text display area
press and hold the
selected feature menu.
To access feature menu options, scroll up pressing the
down by pressing the
When the feature that you want to program is displayed in the LCD text area,
press and hold the
to the previous options menu. You can save and exit the programming mode
anytime by pressing the
exited without saving if there is no remote activity for 30 seconds.
Note: Selecting "Back" returns to the previous menu without saving the setting.
30
X
A U
button on the remote for about 8 seconds. (ignore the car
Allows feature programming of the remote
Not available with this system
Sets up remote for programming to the system
Places remote in demo mode
Exits programming
A U
X
button until the remote beeps to confirm entry into the
button.
AUX
A U
X
for 1 second to save the feature. The LCD screen returns
or
A U X
X
A U
Description
. Programming mode is automatically
© 2008 Directed Electronics. All rights reserved.
button to scroll down the
AUX
button, or scroll
AUX
Advertisement
Table of Contents
