General Purpose Water Bath Specifications - Thermo Scientific Precision GP 02 User Manual

Chapter 2
| General Information
2-2
| Precision

General Purpose Water Bath Specifications

Reservoir Fluid Control
Temperature °C
°F
Set Point Temperature
Range°C
°F
Ambient Temperature °C
Range °F
Stability @ 37°C
Uniformity @ 37°C
Heating Output watts
Bath Volume liters
Overall Bath Dimensions
(L x W x H) cm 23.0 x 19.9 x 23.3
inches
Bath Work Area
Dimensions
(L x W x H) cm 13.8 x 15.5 x 15.0
inches
Approximate Weight kg
lb
Electrical
Requirements (VAC/Hz)
(Voltage ±10%)
Compliance
Maximum Relative
Humidity
(Non Condensing)
Operating Altitude meters
feet
Overvoltage Category
Pollution Degree
Storage Temperature °C
Range °F
Low-end reservoir fluid control temperatures require supplemental cooling.
Specifications obtained at sea level using water.
Thermal beads may be used instead of water but they will degrade the bath's uniformity and stability.
Bath depth includes bezel, height does not include lid.
Thermo Fisher Scientific takes no responsibility for damages caused by the selection of an unapproved fluids.
Thermo Fisher Scientific reserves the right to change specifications without notice.
GP 02 GP 2S
Ambient to 90
Ambient to 194
200 300
2 2
24.6 x 35.5 x 23.2
9.1 x 7.8 x 9.2 9.7 x 14.0 x 9.1
15.3 x 30.0 x 6.5
5.4 x 6.1 x 5.9 6.0 x 11.8 x 2.6
3.5 4
7 9
100-115/50-60
200-230/50-60
CE
UL
80% for temperatures up to 31°C (88°F)
decreasing linearly to 50% relative humidity at 40°C (104°F)
Sea Level to 2000
Sea Level to 6560
GP 05
Ambient to 100
Ambient to 212
+5 to 100
+9 to 212
+15 to 45
+59 to 113
±0.1
±0.2
300
5
24.6 x 35.5 x 23.2 39.3 x 38.3 x 23.3
9.7 x 14.0 x 9.1 15.5 x 15.1 x 9.2
15.4 x 30.0 x 15.0 30.1 x 33.0 x 15.0
6.1 x 11.8 x 5.9 11.9 x 13.0 x 5.9
4.5
10
or
RoHS
WEEE
II
2
-25 to +60
-13 to +140
GP 10
800
10
7.5
16
Thermo Scientific