Selecting A Preset Set Point; Changing The Set Point - Thermo Scientific Precision GP 02 User Manual

CAUTION
Thermo Scientific

Changing the Set Point

When operating without a lid, limit the maximum set point to 60°C.
The set point is the desired reservoir fluid temperature. You can change the set point with the
bath running or not. From the home screen press either arrow key to display:
Press, and hold, the arrow keys to bring up the desired set point value. The range is 5°C to
100°C. Once the desired value is displayed, in this case 50.0°C, press the soft key below
29.9°C
50.0°C
x
not
saved.

Selecting a Preset Set Point

The set point is the desired reservoir fluid temperature. You can select the set point with the bath
running or not. Or, from the home screen press
T1 35.0°C
T2 41.5°C
T3 44.5°C
T4 45.5°C
to save the change or press the soft
x
key below to not save the change. The
display returns to the home screen. Note After
a 30 second delay if neither key is pressed the
display returns to the home screen, any change is
.
Use the arrow keys to select the desired set point
value. Once the desired set point is highlighted
press the soft key below
change and return to the home screen.
After a 30 second delay if neither key is pressed
the display returns to the home screen, any change
not
is saved.
Chapter 4
Operation |
to save the
4-3
Precision |