Table of Contents
Advertisement
Thermo Scientific
General Specifications
Section 2
Note Pure water exposed to the atmosphere will absorb CO2. This will
lower resistivity and pH.
Maximum flow rate
Temperature range
Exchange capacity
Plumbing service connections
Inlet
Outlet
Drain
Overall dimensions
Width
Depth
Height
Electrical requirements
Model D0800
Model D0805
1
Using average tap water. Delivers deionized water in continuous flow at atmospheric
pressure. Although the cartridge holder can be operated at inlet pressures up to 700
kPa (100 psig), the cartridge holder cannot without any back pressure. Ensure that
maximum flow rate is not exceeded, the outlet is open to atmosphere, and there are no
tubing restrictions.
2
Provided with 1.7 m (5-1/2") electrical cord and plug.
s
SI Units
38 LPH
1
4-49° C
see below
~
~
~
152 mm
213 mm
724 mm
120V, 50/60 Hz, 1 phase
2
240V, 50/60 Hz, 1 phase
2
English
10 GPH
1
40-120° F
see below
1/4" OD tubing
1/4" OD tubing
1/4" OD tubing
6"
8-3/8"
28-1/2"
120V, 50/60 Hz, 1 phase
2
240V, 50/60 Hz, 1 phase
2
Deionizer
2-1
Advertisement
Table of Contents
