Changing The Set Point; Selecting A Preset - Thermo Scientific Precision GP 02 User Manual

Changing the Set Point

When operating without a lid, limit the maximum set point to 60°C.
You can change the set point with the bath running or not. From the home screen press either arrow key to display:
29.9°C
35.0°C
x

Selecting a Preset

T1 35.0°C
T2 41.5°C
T3 44.5°C
T4 45.5°C
Note After a 30 second delay if neither key is pressed the display returns to the home screen, any change is not saved.
Press, and hold, the arrow keys to bring up the desired set point value. The range is 5°C
to 100°C. Once the desired value is displayed, in this case 50.0°C, press the soft key
below to save the change or press the soft key below
change. The display returns to the home screen.
Note After a 30 second delay if neither key is pressed the display returns to the home
screen, any change is not saved.
You can select a preset with the bath running or not.
From the home screen press
Use the arrow keys to select the desired preset. Once the desired preset is highlighted
press the soft key below
:
to save the change and return to the home screen.
x
to not save the
Page 2 of 2