CAUTION
Thermo Scientific
Draining
Drain the bath before moving or storing.
Ensure the fluid is at a safe handling temperature, ~40°C or lower. Wear protective
clothing and gloves.
•
Place a suitable receptacle underneath the drain.
•
Slowly turn the drain plug until flow is observed.
•
When the flow stops close the drain plug.
Draining
(GP 10, GP 20, GP 28 and GP 15D only)
•
Remove the drain hose from its housing and insert the fitting into the drain quick disconnect.
•
When the flow stops remove the hose and reinsert it back into the housing.
Figure 3-3 – GP Bath Drain Hose
Chapter 3
Installation
|
3-7
Precision
|