Download Print this page

DSC Power832 Installation Manual page 30

Hide thumbs Also See for Power832:

Advertisement

P
R
O
G
5.7.10
Miscellaneous
The panel will transmit the Keypad Lockout Reporting Code if the lockout is activated (See
"Keypad
Lockout") .
The DLS Lead In Reporting Code will only be transmitted if the DLS Call Back feature is being used (See
Section 5.8
"Downloading") . Before the panel calls the computer back it will call central station and transmit
the reporting code to indicate a download session is about to begin. After downloading is complete the
panel will transmit a DLS Lead Out Reporting Code to indicate the download session is complete.
If the panel fails to transmit information to the central station it will display a failure to communicate trouble
condition. The panel will transmit a Phone Number 1 Failure to Communicate Reporting Code or a
Phone Number 2 Failure to Communicate Reporting Code the next time it calls the central station. The
panel will transmit the old events, followed by the failure to communicate, followed by the new events. This
will allow central station to determine which events are old or new.
If the Event Buffer is uploaded on a regular basis an Event Buffer 75% Full Reporting Code can be
transmitted to warn the Buffer is almost full. This is also useful if the PC5400 Printer Module is being used.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Reporting Codes ........................................................................... Section [320] to [353]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
5.8
Downloading
Downloading allows programming of the entire control panel via a computer, modem and telephone line.
All functions and features, changes and status, such as trouble conditions and open zones can be viewed
or programmed by downloading.
When power is applied to the panel downloading will be enabled for 6 hours. This will allow
you to perform downloading without having to do any keypad programming.
If the Downloading Answer option is enabled (or during the first 6 hours after power up) the panel will
answer incoming calls for downloading provided the following conditions occur:
1. The panel hears one or two rings then misses a ring.
2. At this point the panel will start a timer.
3. If the panel hears another ring before the Answering Machine Double Call Timer expires it will answer
on the first ring of the second call.
The panel will immediately go on line and begin the download process unless the Call Back option is
enabled. If enabled, the panel and computer will both hang up. The panel will then call the Download
Computer Telephone Number and wait for the computer to answer. Once the computer answers
downloading will begin.
If User Enable DLS Window is enabled the user can turn the downloading feature on for 6 hours through
the [ ][6] keypad command. After 6 hours the panel will not answer incoming calls unless Downloading
Answer is enabled (See
The Download Access Code and Panel Identifier Code are for security and proper identification. Both the
panel and the computer file should have the same information programmed before attempting to download.
If the LINKS1000 cellular communicator is being used it is possible to download through the LINKS if the
phone line is disconnected. If Call Back is being used you may have to program the LINKS1000
Preamble
Preamble
Preamble
Preamble to have the panel call back the computer correctly.
Preamble
For more information refer to the Download Manual included with the computer software.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Downloading Answer ..................................... Section [401], Option [1]
User Enable DLS Window ............................. Section [401], Option [2]
Call Back ........................................................ Section [401], Option [3]
Answering Machine Double Call Timer ......... Section [405]
Download Computer Telephone Number ...... Section [402]
Download Access Code ................................ Section [403]
Panel Identifier ............................................... Section [404]
LINKS1000 Preamble (Downloading) ............. Section [490]
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
R
A
M
D
Section 3.4 "[ ] Commands, [ ][6] User
E
S
C
R
I
Functions").
30
P
T
I
O
N
Section 5.22
LINKS1000
LINKS1000
LINKS1000
LINKS1000
S

Advertisement

loading

This manual is also suitable for:

Pc5010