The Lacp Port Edit Screen - ZyXEL Communications GS1900-8 User Manual

Figure 128 Configurat ion > Link Aggregat ion > LACP Port
The following t able describes t he labels in t his screen.
Table 94 Configurat ion > Link Aggregat ion > LACP Port
LABEL
LACP Port
Edit
Port
Priorit y
Tim er ( sec)

22.2.7 The LACP Port Edit Screen

Use t his screen t o edit a LACP Port . Click Con figu r a t ion > Lin k Aggr e ga t ion > LACP Por t > Edit
t o open t his screen.
Figure 129 Configurat ion > Link Aggregat ion > LACP Port > Edit
Chapter 22 Configuration: Link Aggregation
DESCRIPTION
Select t his check box t o configure t he propert ies of a port . Click t he Edit but t on change t he
propert ies of t he port .
Displays t he port index num ber.
Displays t he priorit y value.
Displays t he Tim er value in seconds.
Tim eout is t he t im e int erval bet ween t he individual port exchanges of LACP packet s in order
t o check t hat t he peer port in t he t runk group is st ill up. I f a port does not respond aft er
t hree t ries, t hen it is deem ed t o be " down" and is rem oved from t he t runk. Set a short
t im eout ( one second) for busy t runked links t o ensure t hat disabled port s are rem oved from
t he t runk group as soon as possible.
GS1900 Series User's Guide
134