The Ipv6 Screen - ZyXEL Communications GS1900-8 User Manual

The following t able describes t he labels in t his screen.
Table 55 Configurat ion > Syst em > I P > I Pv4
LABEL
I Pv4 Address
Mode
I P Address
Subnet Mask
Gat eway
DNS Server 1
DNS Server 2
Managem ent
VLAN
Apply
Cancel

18.2.2 The IPv6 Screen

Use t his screen t o view t he I Pv6 int erface st at us and Swit ch's m anagem ent I Pv6 addresses.
Click Con figu r a t ion > Syst e m > I P > I Pv6 t o open t his screen.
Figure 89 Configurat ion > Syst em > I P > I Pv6
The following t able describes t he labels in t his screen.
Table 56 Configurat ion > Syst em > I P > I Pv6
LABEL
I Pv6 Address
DHCPv6 Client
Aut o
Configurat ion
Chapter 18 Configuration: System
DESCRIPTION
Select St at ic t o define t he I Pv4 net work propert ies or DHCP t o allow t he device t o define
t he propert ies.
Ent er t he I P address of t he Swit ch in t he I P dom ain.
Ent er t he subnet m ask of t he Swit ch in t he I P dom ain.
Ent er t he I P address of t he default out going gat eway in dot t ed decim al not at ion, for
exam ple 192.168.1.254.
Ent er t he I P address for t he prim ary dom ain nam e server. DNS ( Dom ain Nam e Syst em ) is
for m apping a dom ain nam e t o it s corresponding I P address and vice versa.
Ent er t he I P address for t he secondary dom ain nam e server. DNS ( Dom ain Nam e Syst em )
is for m apping a dom ain nam e t o it s corresponding I P address and vice versa.
Ent er t he port num ber of t he m anagem ent VLAN.
Click Apply t o save t he changes.
Click Ca nce l t o discard t he changes.
DESCRIPTION
Select En a ble t o allow t he device t o act as a DHCPv6 client or D isa ble t o disallow it . This
field displays t he Swit ch's DHCP set t ings when it is act ing as a DHCPv6 client .
Select En a ble t o allow t he device t o aut o- configure t he I Pv6 propert ies or D isa ble t o
m anually ent er t he propert ies.
GS1900 Series User's Guide
95