Ipv6 Ping Test - ZyXEL Communications GS1900-8 User Manual

Follow t he st eps t o perform a ping t est .
1. I n I P Addr e ss, ent er t he I Pv4 address.
2. I n Coun t , ent er t he num ber of ping packet s.
3. I n I n t e r va l, ent er t he t im e int erval in seconds.
4. I n Size , ent er t he packet size in byt es
5. Click Apply t o perform t he ping t est .
OR
Click Ca nce l t o discard t he changes.
The t est result s are displayed in Re sult s.

32.7.3 IPv6 Ping Test

Click M a int e na nce > D ia gnost ics > PI N G > I Pv6 in t he navigat ion panel t o open t his screen.
Use t his screen t o ping an I Pv6 server.
Figure 217 Maint enance > Diagnost ics > PI NG > I Pv6
The following t able describes t he labels in I Pv6 Pin g Te st .
Table 183 Maint enance > Diagnost ics > PI NG > I Pv6
LABEL
I Pv6 Address
Count
I nt erval
Size
Follow t he st eps t o perform a ping t est .
1. I n I P Addr e ss, ent er t he I Pv6 address.
2. I n Coun t , ent er t he num ber of ping packet s.
3. I n I n t e r va l, ent er t he t im e int erval in seconds.
4. I n Size , ent er t he packet size in byt es
Chapter 32 Maintenance
DESCRIPTION
Ent er t he address of t he t arget host server.
Ent er t he num ber of ping packet s t o send. The range is 1 t o 5 packet s; t he default count is
4.
Ent er t he t im e in seconds bet ween sending ping packet s. The range is 1 t o 5 seconds; t he
default is 1 second.
Ent er t he individual packet size in byt es. The range is 8 t o 5120 byt es; t he default is 56
byt es.
GS1900 Series User's Guide
221