The Lacp Port Edit Screen - ZyXEL Communications GS1900 Series User Manual

The following table describes the labels in this screen.
Table 96 Configuration > Link Aggregation > LACP Port
L ABEL
LACP Port
Port
Priority
Timer (sec)
Edit
Cancel
22.2.7 T he L AC P Po rt Edit Sc re e n
Use this screen to edit a LACP Port. Click
screen.
Fig ure 150
The following table describes the labels in this screen.
Table 97 Configuration > Link Aggregation > LACP Port > Edit
L ABEL
LACP Port
Port List
Priority
Timer
Apply
Cancel
Chapter 22 Configuration: Link Aggregation
DESC RIPT IO N
Displays the port index number.
Displays the priority value.
Displays the Timer value in seconds.
Timeout is the time interval between the individual port exchanges of LACP packets in order to
check that the peer port in the trunk group is still up. If a port does not respond after three tries,
then it is deemed to be "down" and is removed from the trunk. Set a short timeout (one
second) for busy trunked links to ensure that disabled ports are removed from the trunk group as
soon as possible.
Select this check box to configure the properties of a port. Click the
properties of the port.
Click to discard the changes.
C a nc e l
Configuration > Link Aggregation > LACP Port > Edit
DESC RIPT IO N
Displays the list of port index numbers to be configured.
Enter a value for the port priority. The number can be between 1 and 65,535.
Select a timer value of either 1 second or 30 seconds.
Click to save the changes.
Apply
Click to discard the changes.
C a nc e l
GS1900 Series User's Guide
>
C o nfig ura tio n L ink Ag g re g a tio n
149
button change the
Edit
> > to open this
L AC P Po rt Edit