The Error Disabled Screen - ZyXEL Communications GS1900-8 User Manual

31.3.10 The Trap Destination Add/Modify Screen
Use t his screen t o configure t he Tr a p D e st ina t ion set t ings. Click Con figu r a t ion > M a na ge m e nt
> SN M P > Tr a p D e st ina t ion > Add/ M odify t o open t his screen.
Figure 202 Configurat ion > Managem ent > SNMP > Trap Dest inat ion > Add/ Modify
The following t able describes t he labels in t his screen.
Table 169 Configurat ion > Managem ent > SNMP > Trap Dest inat ion > Add/ Modify
LABEL
SNMP Trap Dest inat ion
Server
Version
Com m unit y
Nam e
User Nam e
UDP Port
Apply
Cancel
31.4 Error Disable

31.4.1 The Error Disabled Screen

Use t his screen t o configure t he Er r or D isa ble d set t ings. Click Con figu r a t ion > M a na ge m e nt >
Er r or D isa ble t o open t his screen.
Chapter 31 Configuration: Management
DESCRIPTION
Ent er t he I P address of t he server or a st ring ident ifying t he server address t hat t his ent ry
belongs t o.
Select t he SNMP t rap support ed version. Possible versions are:
• SNMP v1 : Set SNMP t rap suppor t ed ver sion 1.
• SNMP v2 c: Set SNMP t rap support ed version 2c.
• SNMP v3 : Set SNMP t rap suppor t ed ver sion 3.
Displays t he com m unit y nam e t hat t his ent ry belongs t o.
Displays t he user nam e t hat t his ent ry belongs t o.
Ent er a UDP port for t his ent ry.
Click Apply t o save t he changes.
Click Ca nce l t o discard t he changes.
GS1900 Series User's Guide
206