Exerpeutic 1020H Owner's Manual page 19

COMPUTER
Pre-Set:
PRE-SET TARGET GOALS: The computer allows for 3 different Pre-set target features,
Time/Distance/Calories. To set a Target, have the computer in stop mode and press the MODE
button to select one of the 3 targets. The display will flash, ready for you to press SPEED UP or
SPEED DOWN to adjust the goals. Press the SET button to confirm the Time/Distance/Calorie
target. Once you have made your selection, press the START button to begin.
PRE-SET TARGET TIME: A pre-set target time range can be set from 1:00 to 99:00 minutes. The
walking belt will start moving with an initial speed of 1.0 MPH. The speed can be adjusted using the
SET button. Time will count down from the set value to 0:00, The Computer will BEEP when the
Target is met.
PRE-SET TARGET DISTANCE: A pre-set target distance range can be set from 0.10 to 99.0 miles.
The walking belt will start moving with an initial speed of 1.0 MPH. The speed can be adjusted
using the SET button. Distance will count down from the set value to 0.00, The Computer will BEEP
when the Target is met.
PRE-SET TARGET CALORIES: A pre-set target calorie burn range can be set from 10 to 9,990
calories. The walking belt will start moving with an initial speed of 1.0 MPH. The speed can be
adjusted using the SET button. Calories will count down from the set value to 0. The Computer will
BEEP when the Target is met.
17