Exerpeutic 1020H Owner's Manual page 16

ASSEMBLY
(28) Triangle Knob 2 PCS
Step 3
3a. Handlebar Placement: Pull out the Short Knob (78) and then lift the Handlebar (2) until it is
perpendicular to the Stabilizer (80) frame. Ensure that the Short Knob (78) "POPS" into the
locked position after the Handlebar (2) is adjusted. Secure the Handlebar (2) to the Stabilizer (80)
with two Handlebar Knobs (29) and two Flat Washers (79).
Step 4
4a. Connecting the Wires: Connect the larger Signal Cable (25) from the Handlebar (2) to the
similar Cable coming from the Computer (26). Connect the Black Function Quick Key (84) and
the White Speed Quick Key (35) from the Handlebar (2) to the similar Black and White Wires
coming from the Computer (26).
4b. Installing the Computer: Attach the Computer (26) onto the Handlebar (2) with two Triangle
Knobs (28). Be sure to tuck the excess wires into the frame. Place the Safety Tether Key (27)
onto the Computer (26).
14