Configure The Settings Relating To H.264 Images [Jpeg/H - Panasonic WV-SFV781L Operating Instructions Manual

11 Configure the settings relating to images and audio [Image/Audio]
11.3 Configure the settings relating to H.264 images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 44, page 46)
Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image
quality", etc. in this section. Refer to page 70 for the settings relating to JPEG images.
H.264(1)/H.264(2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default:
–
H.264(1): On
–
H.264(2): On
Note
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)" displaying of H.264 images
or JPEG images on the "Live" page will become available.
•
When "On" is selected for "H.264 transmission" in "H.264(1)" or "H.264(2)" the transmission interval of
JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
72 Operating Instructions