Configure The Viqs Area - Panasonic WV-SFV781L Operating Instructions Manual

11.10 Configure the VIQS area

The VIQS area is specified by following the steps below.
1.
Drag the mouse on the screen to specify the area (up to 8 areas).
→
The specified area is set to area "1(White)", and the outline is displayed.
The areas are set in the area number order from number 1. The color next to the area number show
the color of the corresponding outline.
2.
Configure the difference level in the image quality between specified areas and non-specified areas. The
greater the difference level, the more the image quality of the non-specified area is reduced. This makes
it possible to moderate the image data size.
3.
Select On/Off to activate/deactivate a distributed image of "H.264(1)", "H.264(2)", "H.264(3)", or "H.
264(4)".
Note
•
When "8 mega pixel [16:9](30fps mode)" is selected for "Image capture mode", only H.264(1) can
be selected.
•
When "8 mega pixel [16:9](15fps mode)", "12 mega pixel [4:3](15fps mode)", or "5 mega pixel [4:3]
(30fps mode)" is selected for "Image capture mode", only H.264(1) and H.264(2) can be selected.
•
When "4 mega pixel [16:9](30fps mode)" is selected for "Image capture mode", H.264(1) to H.
264(4) can be selected.
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 99