Configure The Settings Relating To H.264 Images [Jpeg/H.264] - Panasonic WV-SFV311A Operating Instructions Manual

11.3 Configure the settings relating to H.264 images
[JPEG/H.264]
Click the [JPEG/H.264] tab on the "Image/Audio" page. (®page 42, page 44)
Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image
quality", etc. in this section. Refer to page 77 for the settings relating to JPEG images.
Smart Coding mode
H.264(1)/H.264(2)/H.264(3)/H.264(4)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to transmit H.264 images.
•
On: Transmits H.264 images.
•
Off: Does not transmit H.264 images.
•
Default: On
Note
•
When "On" is selected for "H.264 transmission" in "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)"
displaying of H.264 images or JPEG images on the "Live" page will become available.
•
When "On" is selected for "H.264 transmission" in "H.264(1)", "H.264(2)", "H.264(3)", or "H.264(4)", the
transmission interval of JPEG images may sometimes become longer.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for JPEG image transmission.
•
On: H.264 images and audio will be transmitted using the HTTP port. Refer to page 147 for further
information about the HTTP port number settings.
11 Configure the settings relating to images and audio [Image/Audio]
1920x1080
4096kbps *
Operating Instructions 79