Panasonic WV-SFV781L Operating Instructions Manual page 127

IPv6 network
[Manual]
Select "On" or "Off" to determine whether or not to manually configure the IP address for IPv6 network (IPv6
address).
•
On: Enter an IPv6 address manually.
•
Off: Manual entry of an IPv6 address will become unavailable.
•
Default: Off
[IP address(IPv6)]
When "On" is selected for "Manual", manual entry of the IPv6 address is required. Do not enter an address
already in use.
Note
•
When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible
router and turn on the automatic IPv6 address assignment function. In this case, it is necessary to
configure an IPv6 address including prefix information provided from the IPv6 compatible router. Refer
to the manuals provided with the router for further information.
[Default gateway]
When "On" is selected for "Manual" of IPv6 network, enter the default gateway of IPv6 network of the camera.
Default: None (blank)
[DHCPv6]
Select "On" or "Off" to determine whether or not to use the IPv6 DHCP function.
Configure the DHCP server not to assign the same IP addresses used for the other network cameras and PCs
whose IP addresses are unique. Refer to the network administrator for further information about the settings
of the server.
•
Default: Off
[Primary DNS server address], [Secondary DNS server address]
Enter the IPv6 address of the DNS server. Refer to the network administrator about the IPv6 address of the
DNS server.
Common
[HTTP port]
Assign the port numbers independently.
•
Available port number: 1 - 65535
•
Default: 80
The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000 - 61000
[Line speed]
Select the line speed for data transmission from the following. It is recommended to use with the default
"Auto".
•
Auto: Line speed will be applied automatically.
•
100M-Full: 100 Mbps full-duplex
•
100M-Half: 100 Mbps half-duplex
•
10M-Full: 10 Mbps full-duplex
•
10M-Half: 10 Mbps half-duplex
•
Default: Auto
15 Configuring the network settings [Network]
Operating Instructions 127