Panasonic WV-SFV781L Operating Instructions Manual page 57

Hide thumbs Also See for WV-SFV781L:
Table of Contents

Advertisement

Follow the on-screen instructions to register with "Viewnetcam.com".
Refer to page 160 or the "Viewnetcam.com" website (http://www.viewnetcam.com/) for further information.
Default: Off
Note
When the "DDNS" setting is changed, the "DDNS" setting on the [Advanced] tab of the "Network" page
also changes to the same setting.
[Recommended network setting for internet]
The recommended settings for connecting to the Internet are performed here.
By clicking the [Set] button, a dialog displaying how the following settings will change is displayed.
Click the [OK] button after checking the settings to change the settings to the displayed values.
[JPEG/H.264] tab on the "Image/Audio" page
[JPEG(1)]
[Image capture size]: VGA/640x360
[H.264(1)]/[H.264(2)]/[H.264(3)]/[H.264(4)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
[H.264(1)]
[H.264 transmission]: Off
[H.264(2)]
[Image capture size]: VGA/640x360
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(3)]
[Image capture size]: QVGA/320x180
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[H.264(4)]
[Max bit rate (per client)*]: Max. 1024 kbps, Min. 128 kbps
[Network] tab on the "Network" page
[Common]
[Max RTP packet size]: Limited(1280byte)
[HTTP max segment size(MSS)]: Limited(1280byte)
10 Configure the basic settings of the camera [Basic]
Operating Instructions
57

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wv-spv781lWv-spv781lpj

Table of Contents