Download
Share
Print this page
Panasonic WV-SFV110 Installation Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. WV-SFV110
  6. Installation manual
Panasonic WV-SFV110 Installation Manual

Panasonic WV-SFV110 Installation Manual

Hide thumbs Also See for WV-SFV110:

Advertisement

Quick Links

Download this manual
Installation Guide
Included Installation Instructions
Network Camera
WV-SFV130/WV-SFV110
Model No.
WV-SFV130M/WV-SFV110M
WV-SFV130
* For information about how to perform the settings and how to operate the camera,
refer to the operating instructions on the provided CD-ROM.
* This manual takes WV-SFV130 for example for illustration.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.

Advertisement

loading

Related Manuals for Panasonic WV-SFV110

Summary of Contents for Panasonic WV-SFV110

  • Page 1 Installation Guide Included Installation Instructions Network Camera WV-SFV130/WV-SFV110 Model No. WV-SFV130M/WV-SFV110M WV-SFV130 * For information about how to perform the settings and how to operate the camera, refer to the operating instructions on the provided CD-ROM. * This manual takes WV-SFV130 for example for illustration.
  • Page 2 For U.S.A. WARNING: NOTE: This equipment has been tested and • To prevent injury, this apparatus must be found to comply with the limits for a Class A digi- securely attached to the wall/ceiling in accor- tal device, pursuant to Part 15 of the FCC Rules. dance with the installation instructions.
  • Page 3 Contents Important safety instructions ......................4 Limitation of liability ........................4 Disclaimer of warranty ........................5 Preface ............................5 About notations ..........................5 Main functions ..........................6 About the user manuals ........................ 6 System requirements for a PC ...................... 7 Trademarks and registered trademarks..................
  • Page 4 Important safety instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not block any ventilation openings. Install in accordance with the manufacturer's instruc- tions. 6) Do not install near any heat sources such as radiators, heat registers, stoves, or other appara- tus (including amplifiers) that produce heat.
  • Page 5 Disclaimer of warranty IN NO EVENT SHALL Panasonic i-PRO Sensing Solutions Co., Ltd. BE LIABLE TO ANY PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW: (1) ANY LOSS OR DAMAGE, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT;...
  • Page 6 *5 NEMA: Dust resistance and waterproof performance standards set by National Electrical Manufacturers Association (United States). About the user manuals There are 2 sets of operating instructions for the WV-SFV130 / WV-SFV110 / WV-SFV130M / WV-SFV110M as follows. • Installation Guide: Explains how to install and connect devices.
  • Page 7 IMPORTANT: • For information on the operation verification of the supported operating systems and web browsers, refer to our website at http://security.panasonic.com/pss/security/support/index.html. • When using a PC that does not meet the above requirements, displaying of images may become slower or the web browser may become inoperable.
  • Page 8 • Refer to the “readme.txt” file on the provided CD-ROM for further information about open source software licenses and the source code. • Please note that Panasonic shall not respond to any inquiries regarding the contents of the source code.
  • Page 9 • Apply measures such as user authentication to protect your network against leakage or theft of information, including image data, authentication information (user names and passwords), alarm mail information, FTP server information and DDNS server information. • After the unit is accessed by the administrator, make sure to close the browser. •...
  • Page 10 Keep SDXC/SDHC/SD memory cards Handle this product with care. away from infants and children. Do not drop this product, nor apply shock or Otherwise, they may swallow the cards by vibration to the product. Failure to observe this mistake. may cause trouble. In this case, consult a doctor immediately.
  • Page 11 Periodically images on the screen appear Operating temperature Only turn the power on for the camera when to be distorted When the camera is installed in a location the temperature is -30 °C {-22 °F} or warmer. where it is subject to small vibrations (for exam- This product can be used in low temperature ple, when it is installed near devices that outdoor environments that get as cold as...
  • Page 12 Cleaning the lens Product disposal/transfer Use a lens cleaning paper (used to clean cam- Data saved on this product or a storage device used with this product may lead to personal era lenses or lenses of spectacles). When using information leakage. When it is necessary to solvent, use an alcohols solvent and do not dispose or give this product to someone, even use a thinner or a glass cleaner.
  • Page 13 Precautions for installation Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. In order to prevent injury, the product • Locations near coasts directly subjected to...
  • Page 14 Before installation Router • When installing the product to a ceiling or When connecting this product to the Internet, use a broadband router with the port forward- wall, either directly mount it to a wall or ceiling, or install it using a mount bracket ing function (NAT, IP masquerade).
  • Page 15 Parts and functions Enclosure Dome cover SD memory card slot Network cable INITIAL SET button Built-in microphone Lens body LINK indicator SD CARD indicator Lens ACT indicator About the initial set button Follow the steps below to initialize the network camera. ATurn off the power of the camera.(Disconnect the Ethernet cable from the camera.) BTurn on the power of the camera while holding down the INITIAL SET button, and then keep holding down the button for 10-15 seconds.
  • Page 16 Preparations When installing the camera on a ceiling or a wall, there are three methods as specified below. • Directly mounting to a ceiling or a wall • Use the supplied mount bracket • Use the one-gang junction box IMPORTANT: •...
  • Page 17 Removing the enclosure ■ IMPORTANT: Cover film • Remove the cover film attached to the dome cover after the camera installation is completed. Loosen the 3 enclosure fixing screws (M3) using the Enclosure fixing screws bit (accessory) (Hex wrench, screw size 6.35 mm {1/4 inches} T10).
  • Page 18 Insert an SD memory card ■ Insert an SD memory card fully into the SD memory card slot until a click is heard. IMPORTANT: • When inserting an SD memory card, make sure the direction. Label side How to remove an SD memory card When removing the SD memory card from the SD memory card ☞...
  • Page 19 Processing the ceiling or wall Installing the camera directly on the ceiling or wall ■ Note: Cable access • Use the template (accessory) with the side with the hole arrow facing you. • Ceiling installation: Place the template so that the arrow is pointing to the front of the camera (the lens side).
  • Page 20 Using the mount bracket (accessory) ■ When conduits are used for wiring, or when there is no Cable space available for wiring in the ceiling or the wall, the access hole mount bracket is used. Note: • Use the template (accessory) with the side with the arrow facing you.
  • Page 21 When the cable is quickly reconnected, the power may not be supplied from the PoE device. Connect a Ethernet cable (category 5e or better, straight) between a PoE device (such as a hub) and the network connector of the camera. WV-SFV130/WV-SFV110 ■ IMPORTANT: •...
  • Page 22 Camera side Ethernet cable WV-SFV130M/WV-SFV110M ■ (female) side (male) AInsert the M12 plug into the M12 jack connected to the camera. BTightly fasten the connector by rotating both rings in opposite directions When connecting to a network using a PoE hub ■...
  • Page 23 Installation Installing the camera directly on the ceiling or wall ■ Secure the camera with 3 screws (M4) (locally procured). IMPORTANT: • Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more. • Do not touch the lens. •...
  • Page 24 Using the mount bracket ■ Connect the conduit attachment (locally procured) to the conduit. Secure the mount bracket (accessory) to the conduit attachment with the attachment for female thread (locally procured). Mount the mount bracket to either a ceiling or a wall. (3 screws (M4) (locally procured)) (Required pull-out capacity of a single screw/bolt is 196 N {44 lbf} or more.) IMPORTANT: •...
  • Page 25 Using a one-gang junction box ■ Secure the mount bracket (accessory) to the one-gang junction box built in a ceiling or a wall. Secure the mount bracket to the one-gang junction box. (2 screws (M4) (locally procured)) Note: • When using a one-gang junction box, use the holes from positions shown in the mount bracket illustration below.
  • Page 26 Select the camera (A) you want to configure, and click [Access Camera] (B). Note: • When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same MAC address as the MAC address printed on the camera that you want to configure.
  • Page 27 HTTPS settings. • When changing settings related to the network settings, such as connection mode, IP address, and subnet mask, click the [Network Settings] button in [Panasonic IP Setting] screen as shown in step 3, then change each setting.
  • Page 28 Adjustment Adjust the camera angle. ■ When adjusting the camera angle, making sure not to touch the lens, face the wider end of the lens adjuster towards you and then attach it to the lens. When attaching or removing the lens adjuster, squeeze the wider end of the lens adjuster as shown in the illus- tration to open the narrower end of the lens adjuster.
  • Page 29 ■  Ceiling ■  Wall right beside Vertical : -20 ° to 0 ° ( right under to +90 ° ( Horizontal : -20° to +20° right under Vertical : -20 ° to 0 ° ( right beside to +90 ° ( Horizontal : -90°...
  • Page 30 Use an SD memory card formatted on the camera. Or install the software to format the SD memory card on the PC. Refer to our website (http://security.panasonic.com/pss/security/support/ info.html) for further information about the supported software. • Isn't the inserted SD memory card faulty?
  • Page 31 About the indicator The indicator will light or blink as follows depending on the camera status. Indicator type and operation state Change of indicator indication ACT indicator When data is being sent via the network camera Blinks green (accessing) LINK indicator When the camera is able to communicate with the con- Lights orange nected device...
  • Page 32 Polycarbonate resin, Clear Others: Tamper-resistant enclosure *1 Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further information about Power source and Power consumption. *2 Only when installation work is properly performed according to the instructions guide and appropriate waterproof treatment is performed.
  • Page 33 • Camera Image sensor: Approx. 1/3 type MOS image sensor Effective pixels: SFV130 Approx. 2.4 mega pixels SFV110 Approx. 1.3 mega pixels Scanning area: SFV130 5.28 mm (H) × 2.97 mm (V) {7/32 inches (H) × 1/8 inches (V)} SFV110 4.86 mm (H) ×...
  • Page 34 +90 ° right beside Installing on a wall: Horizontal: –90° to +90° Vertical: –20 ° to 0 ° (right beside) to +90 ° (right under) • Network Network: 10BASE-T/100BASE-TX, RJ45 connector (WV-SFV130, WV-SFV110) M12 connector (WV-SFV130M, WV-SFV110M)
  • Page 35 Resolution: SFV130 H.264 2 mega pixel [16:9] JPEG (MJPEG) 1920×1080, 1280×720, 640×360, 320×180, 160×90 *"1920x1080"mode is only available for H.264(1), H.264(2). 2 mega pixel [4:3] 1600×1200, 1280×960, 800×600, VGA, 400×300, QVGA, 160×120 *"1600x1200"mode is only available for H.264(1), H.264(2). 3 mega pixel [16:9] 2048×1536* ,1280×960, 800×600, VGA, 400×300, QVGA, 160×120...
  • Page 36 Up to 16 camera images can be displayed simultaneously on a multi-screen. (Including the camera itself) Compatible SDXC/SDHC/ Manufactured by Panasonic (SD speed class 4 or higher) SD memory card * SDXC memory card: 64 GB, 128 GB SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB...
  • Page 37 Bit (Hex wrench, screw size 6.35 mm {1/4 inches} T10)..........1 pc. Lens adjuster ......................1 pc. RJ45 waterproof connector cover (WV-SFV130, WV-SFV110) ........1 pc. RJ45 waterproof connector cap (WV-SFV130, WV-SFV110) ........1 pc. *1 This product comes with several types of warranties. Each warranty is only applicable to the products purchased in the regions indicated on the relevant warranty.
  • Page 40 Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada Authorised Representative in EU: 1-877-495-0580 https://www.panasonic.com/ca/ Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany © Panasonic i-PRO Sensing Solutions Co., Ltd. 2019 Ns0316-4109 PGQX2017VA Printed in China...

This manual is also suitable for:

Wv-sfv130Wv-sfv130mWv-sfv110m