Scene File - Panasonic WV-SFV781L Operating Instructions Manual

•
Default: 128
[Fog compensation]
Select "On" or "Off" to determine whether or not to activate the fog compensation function. When "On" is
selected for "Wide dynamic range (WDR)", or when "On" is selected for "Adaptive black stretch", this setting
is not available. The fog compensation function can make dim images that have been affected by fog or other
conditions clearer using digital image processing.
•
On: Activates the fog compensation function.
•
Off: Stops the fog compensation function.
•
Default: Off
[Level]
Adjust the fog compensation level.
The level of compensation will increase when the cursor is moved in the "+" direction, and decrease when the
cursor is moved in the "-" direction. Click the [Reset] button to reset to the default setting.
•
Default: 64
[High light compensation(HLC)]
Select "On" or "Off" to determine whether or not to activate the high light compensation function. When "On"
is selected for "Wide dynamic range" or "On" is selected for "Back light compensation (BLC)", this setting is
not available.
When the high light compensation function is activated, if there are bright lights (such as those from car
headlights) at night, blown out highlights of subjects can be limited.
•
On: Activates the high light compensation function.
•
Off: Deactivates the high light compensation function.
•
Default: Off
[Level]
Adjust the high light compensation level.
The level of compensation will increase when the cursor is moved in the "+" direction, and decrease when the
cursor is moved in the "-" direction. Click the [Reset] button to reset to the default setting.
•
Default: 16

[Scene file]

The combination of settings used to adjust image quality can be saved as a scene file. The scene file can be
selected here.
Registered scene files can be configured in the "Schedule" page (®page 163). If the timing of when images
are viewed greatly affects the area where images are viewed, registering scene files to the schedule can let
you match a combination of settings to different times of day in order to view images in the best conditions.
[Scene file title]
The scene file name (up to 10 characters) displayed in "Scene file" can be changed. Only file names displayed
in "1:" and "2:" can be changed.
Unavailable characters: " &
[Load] button
Loads the setting data selected in "Scene file" and changes the current image accordingly.
[Register] button
The combination of settings used to adjust image quality that are currently displayed can be registered to the
scene file displayed in "Scene file".
11 Configure the settings relating to images and audio [Image/Audio]
Operating Instructions 85