Change The Aux Name [Alarm] - Panasonic WV-SFV781L Operating Instructions Manual

•
Default: 1s
Black & white output terminal setup
[Black & white output type]
Select "Latch" or "Pulse" for the Black & white output terminal when switching to Black & white output.
•
Latch: When switching to black & white output, the black & white output terminal will be in the state selected
for "Trigger output".
•
Pulse: When switching to Black & white output, the black & white output terminal will be in the state set to
the "Trigger output" setting for the period set for "Pulse width".
•
Default: Latch
[Trigger output]
Select "Open" or "Close" to determine whether to open or close the black & white output terminal when
outputting the alarm signals.
•
Open: The black & white output terminal will open when switching to Black & white output (normally Close).
•
Close: The black & white output terminal will close when switching to Black & white output (normally Open).
•
Default: Close
Note
•
When "Open" is selected, the black & white output terminal will be output for about 20 seconds when
the power of the unit is turned on.
[Pulse width]
When "Pulse" is selected for "Black & white output terminal setup", select a black & white terminal duration
from the following.
•
Available range:1-120s
•
Default: 1s

13.3 Change the AUX name [Alarm]

Click the [Alarm] tab on the "Alarm" page. (®page 44, page 46)
The names of "AUX", "Open" and "Close" on the "Live" page can be changed.
13 Configure the alarm settings [Alarm]
Operating Instructions 109