Panasonic WV-SFV781L Operating Instructions Manual page 132

15 Configuring the network settings [Network]
[SSL]
Select "On" if you want to use SSL encryption when sending E-mail notifications for alarm occurrences or the
"Diag." function. When you select "On", the authentication method will be set to "SMTP". Set the user name
and the password used for authentication.
•
Default: Off
Note
•
Some SMTP servers may not support SSL.
•
SSL supports SMTP over SSL, but STARTTLS is not supported.
•
When "On" is selected, the SMTP port number may need to be set to 465. Ask your Internet service
provider for the appropriate settings.
[Address 1] - [Address 4]
Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.
•
[Alarm] checkbox: When the checkbox is selected, the E-mail notification will be performed upon an alarm
occurrence.
•
[Diag.] checkbox: When the checkbox is selected, the E-mail notification will be provided in the following
cases.
–
When notification of the remaining capacity of the SD memory card has been provided
–
When the SD memory card has become full
–
When the SD memory card cannot be recognized
•
[Destination E-mail address]: Enter the destination E-mail address.
–
Available number of characters: 3 - 128 characters
–
Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_),
and the hyphen (-).
To delete the registered address, click the [Delete] button respective to the desired address.
[E-mail subject]
Enter the E-mail subject.
•
Available number of characters: 0 - 50 characters
[E-mail body]
Enter the E-mail body.
•
Available number of characters: 0 - 200 characters
Note
•
Notification E-mail will be sent with the message "The capacity of the SD memory card is full." when
the SD memory card has become full, or "The SD memory card cannot be detected." when mounting
of the SD memory card has failed.
•
The language of E-mails sent is determined by "Language" on the [Basic] tab. When "Japanese" is
selected, Japanese will be used. If any other language is selected, English is used.
132 Operating Instructions