Panasonic WV-SFV781L Operating Instructions Manual page 35

Recording time
Configure the time period of logs displayed on the log list.
•
From: Configure the starting period of logs displayed on the log list.
–
First recording: Displays from the first log recorded on the SD memory card.
–
Today: Displays the logs recorded today.
–
Yesterday: Displays the logs recorded from yesterday to the present day.
–
Last 7 days: Displays the logs recorded from 6 days ago to the present day.
–
Last 30 days: Displays the logs recorded from 29 days ago to the present day.
–
Date/time: Displays the logs recorded from the entered date and time on "Date/time" box.
•
To: Configure the ending period of logs displayed on the log list when "First recording" or "Date/time"
is selected for "From".
–
Last recording: Displays until the last log recorded on the SD memory card.
–
Date/time: Displays the logs recorded until the entered date and time on "Date/time" box.
[Search] button
Searches for logs according to the conditions specified in "Event" and "Recording time".
The search result will be displayed on the log list.
Log list
Displays the log search results.
You can play back recorded data by clicking on the time or duration of the recorded data displayed under
[Time] and [Duration].
•
[Top] button: Click this button to display the log listed at the top.
•
[Prev. page] button: Click this button to display the previous page of the log list.
•
[Next page] button: Click this button to display the next page of the log list.
•
[Last] button: Click this button to display the log listed at the bottom.
•
[Time & date]: Time and date when each log has been recorded will be displayed.
Note
•
When "Off" is selected for "Time display format", the alarm occurrence times are displayed in
24 hour time format.
•
The recording timing of logs is as follows.
–
Alarm log: Alarm occurrence time and date will be filed as a log.
–
Manual/Schedule log: Time and date when recording of images onto the SD memory card
started manually or during the period of the schedule will be filed as a log. When images
are recorded sequentially, if "JPEG" is selected for "Recording format", logs will be filed on
the hour every hour (12:00, 1:00, 2:00, etc.). If "H.264" is selected for "Recording format",
logs will be filed every hour from the time when recording starts. However, depending on
the photographic subject and the setting used, logs may be filed in periods of over an hour.
–
FTP trans. error log: Logs will be filed every one hour.
•
[Duration]: Displays the period of time that the data has been recorded on the SD memory card.
Note
•
The difference between the recording end time and recording start time of the image is
calculated by rounding off to the nearest tenth of a second. For this reason, when only 1 JPEG
image is saved, 00:00:00 is displayed for the duration.
•
[Event]: The event type will be displayed.
–
MN/SC: Log by "Manual/Schedule"
–
TRM1: Alarm by alarm input to Terminal 1
–
TRM2: Alarm by alarm input to Terminal 2
–
TRM3: Alarm by alarm input to Terminal 3
–
VMD: Alarm by VMD alarm
–
COM: Alarm by command alarm
–
FTP: Logs saved from FTP periodic image transmission errors
6 Display the log list
Operating Instructions 35