Table of Contents
Advertisement
5000 Series Quick Reference Guide
4. Turn the white ribbon locking lever clockwise to the LOAD position.
5. Lift the old ribbon cartridge off the ribbon deck.
6. Make sure the orange SLIDE LEVER on the new ribbon cartridge is in
the full left position.
7. Turn the yellow SPOOL knob clockwise to take out any slack in the
ribbon fabric between the cartridge arms.
8. Place the printer offline and raise the top cover.
9. Turn the print gap wheel to the LOAD
Step 3 above.]
22
Locking
Lever
Ribbon Cartridge
Ribbon Deck
position.
[See illustration in
GEK-99012
Advertisement
Table of Contents
